|
| 6pot |
|
|||
|
I'm about to install my trip computer. I just want to double check something. I have a Gli and i've been told that the wiring loom will behind the plastics. The only thing i need is a wire going from the computer to the dash cluster? Is this correct? I would have thought that it would have been a part of the loom that goes into the trip computer?
|
|||
| Top | |
|||
| Krytox |
|
|||
|
Please Read:
http://www.fordmods.com/forums/documents.php?doc=32 Need to add one wire from the cluster to the TC. All others can be obtained from either the cig lighter/radio and non used buttons from the demister (as they have illumination) Your cluster wont have the LIGHT BLUE data wire You have to ADD it! to Pin 14 (refer) http://www.fordmods.com/forums/documents.php?doc=14 The light blue on the opposite side is EEC Module data Not TC data! And good luck!
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| prydey |
|
|||
|
yes you should have the clock loom already there behind the plastic. you will need to source a trip comp plug with the trip comp as the clock plug is different. then as has been said and very clearly outlined in the doco, just add 1 wire. i did it in my ef xr6 i had and have just put one in my eb so if i can do it .......
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| Tomeel |
|
||
|
Just doing this mod at the moment and was just wondering if someone can suggest where to get those tiny little terminals from. Have tried Ford, Coventries and a number of Auto Leccys with no success. Any help appreciated. Jim.
|
||
| Top | |
||
| voxace |
|
|||
|
d**k smiths should have em.
Buy a molex plug kit, and scavange it from that. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
. . . .Or get another clock plug from the wreckers.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Happy |
|
|||
|
Tomeel wrote: Just doing this mod at the moment and was just wondering if someone can suggest where to get those tiny little terminals from. Have tried Ford, Coventries and a number of Auto Leccys with no success. Any help appreciated. Jim.
I got heaps if you wanna come down and snip a plug off the looms I have!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Tomeel |
|
||
|
Thanks for all the replies and offers, will try D. Smiths tomorrow and thanks for the offer Happy and will contact you if no joy at D smiths.
|
||
| Top | |
||
| shannonwulff |
|
|||
|
Tomeel wrote: Just doing this mod at the moment and was just wondering if someone can suggest where to get those tiny little terminals from. Have tried Ford, Coventries and a number of Auto Leccys with no success. Any help appreciated. Jim.
mate if your trip computer comes with its own plug (like mine did, had been cut off the loom), you can carefully remove one of the terminals from it, complete with little bit of wire attached, and insert it into the cluster plug and just extend the wire.
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| Baillie |
|
||
|
just installed one in my ef. but cant set the damn thing any help to find instructions would be grately appreciated.
_________________ Beware dislexic BORGS or you will have your AssLaminated |
||
| Top | |
||
| Baillie |
|
||
|
Not to worry. After pressing random buttons I figured it out....who says I aint technologically minded...hehehe.
Works good to. Confirmed that both my speedo and my fuel guage are out of wak. Oh well thank who evers up there that Im puttng in an updated cluster as my next mod.
_________________ Beware dislexic BORGS or you will have your AssLaminated |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
