|
| madmax |
|
|||
|
{USERNAME} wrote: after it overheated i started it and it started normal it was the next day the last thing i did befor it wouldent start was i took off the middle ignition lead the coil one to losen the bolt on the blancer if that helps
So I'd say it would be obvious that you have check that lead. If you removed the lead from the dissy and left the lead hanging loose, the lead may have shorted and fried the coil.
_________________
|
|||
| Top | |
|||
| robsea80 |
|
||
|
i think that could be it madmax ill replace it today and see it looks hard to get to is thir a trick to geting it out thanks
|
||
| Top | |
||
| madmax |
|
|||
|
{USERNAME} wrote: i think that could be it madmax ill replace it today and see it looks hard to get to is thir a trick to geting it out thanks
Best way to get to the coil is from underneath. Come up from under starter motor.
_________________
|
|||
| Top | |
|||
| robsea80 |
|
||
|
hello problum now fixed it was the coil thanks madmax and all that helped
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 49 guests |
