|
| t66_bt1 |
|
|||
|
i was trying to sway my clusters and i have somehow broken my std fairont one! none of the guages work anymore!!! i can still use the digital(what i am using for my tacho and speedo lol) but no gauges! tacho works kinda but not properly! it jolts up and down and says im idling at 1700rpm!!! any help or ideas?
_________________ R.I.P George.D.Gogas!!!
|
|||
| Top | |
|||
| t66_bt1 |
|
|||
|
p.s- it is an ef fairmont ghia!
_________________ R.I.P George.D.Gogas!!!
|
|||
| Top | |
|||
| Disturbed_Dave |
|
|||
|
sounds like a plug isnt connected properly, or has come loose inside? if its more than one guage doing this, then thats what it seems to be
_________________
|
|||
| Top | |
|||
| t66_bt1 |
|
|||
|
both plugs at the bottom are correctly connected my mate apparently when he took it aprt had a play with some round metal things which the needles connect onto!
_________________ R.I.P George.D.Gogas!!!
|
|||
| Top | |
|||
| Krytox |
|
|||
|
needles might be in too far
Use a fork to pry them back
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| data_mine |
|
|||
|
He's either reset the needles improperly (put them on the motors in the wrong position), or pushed them on too far, and they're sticking.
Need to pull the cluster apart again, and lift the needles a bit, to make sure they don't stick on the dial face.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| t66_bt1 |
|
|||
|
thanks guys! i will try this if not the motors may be stuffed!
_________________ R.I.P George.D.Gogas!!!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 94 guests |
