|
| Smackdown |
|
|||
|
Hey guys, next week I will be installing my new cam! About bloody time since I bought it about 3 months ago.
Now, i've already got a noisy lifter which needs to be replaced. But...Will i need some high performance lifters for this cam or will i just need normal lifters. (seeing 12 lifters at $55 each is already expensive.....12 high performance lifters are gonna cost a f**k.) Help me out guys, whats the worst that could happen by using normal lifters? Also, Jonno...if you're around, what lifters did you run when you had this cam? cheers all, no urgency in this post.....well, no too much.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| Timmeh |
|
||
|
What cam did you end up getting?
|
||
| Top | |
||
| voxace |
|
|||
|
Try bursons or something for your lifters, from memory I got mine for $16 each.
|
|||
| Top | |
|||
| mrnasty |
|
|||
|
i got the lifters in mine replaced when i changed my cam to the wade 1004-14, just standard lifters cause the old ones were rooted. I dont think you would need performance lifters, usually with big cams you have to change the springs and timing gear.
_________________ Cougar Zero makes my pants fit nice. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
dont know abotu performance lifters for the falcs..
the noisy lifter could just need new seals a seal kit is about $15
_________________ RIP SCOTT |
|||
| Top | |
|||
| FastFutura |
|
|||
|
scott can get seals piecea piss..
mine are quiet as now (werernt noisy b4 cam change) but yeah. save some cash mate, do the seals, see how it goes.. once the cams in we'll suss it out and see how it goes, its pretty easy to change em over again iff necessary.. + springs etc if ya need. i reckon it'd be fine..
_________________ 94 ED Futura, 5spd, RPM clutch,3.27 LSD, PH4480 pacemakers, 2.5'' Supercat, STG 2 Wade1004-112 advanced16degrees, XH intake K&N panel,pedders superlows, Expursuit puter. clearindicators, volvoTT thermofan
|
|||
| Top | |
|||
| uglybob |
|
|||
|
its a stage 3 crow cam BTW peoples... with a chiptorque chip - SVO XR6's old cam
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Smackdown |
|
|||
|
uglybob wrote: its a stage 3 crow cam BTW peoples... with a chiptorque chip - SVO XR6's old cam
I thought people would be good enough to check below in my signature for details! or wasn't it that obvious?
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| uglybob |
|
|||
|
Smackdown wrote: uglybob wrote: its a stage 3 crow cam BTW peoples... with a chiptorque chip - SVO XR6's old cam I thought people would be good enough to check below in my signature for details! or wasn't it that obvious? timmeh asked ya d**k...  so i responded! i'm just such a nice bloke... 
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 63 guests |
