Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

coil on EL 

 

Page 1 of 1 [ 11 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
TURBO_GHIA
 Post subject: coil on EL
Posted: Tue Jan 23, 2007 5:59 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia
hey guys

my coil went the other day

i want to move it else where ,does anyone know if you can buy the efi plugs things ,i would need a male and female one ,and also does the coil have to be earthed or is that just a mounting bracket on it


cheers jarrod

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42
Top
 Profile  
 
 
EBGizmo
Posted: Tue Jan 23, 2007 6:32 pm 
Technical Contributor
Offline
User avatar

Posts: 691

Joined: 1st Jun 2005

Ride: EFII Sedan

Location: Brisbane
QLD, Australia
The coil does need to be earthed, and earthed good. Be sure to remove any paint from the area you plan to mount the coil. It gets its earth from one of the bolt holes - not sure which one, but a meter from the spark plug hole to the bolt hole will tell all!

 

_________________

EF II Sedan
Ex Chaser, Dual Fuel (Impco LPG)
LSD High, 3.23, Black wheels, other shiny bits.

EB II Sedan <--- R.I.P. (Rest in pieces - gone to the wreckers for $50...... bargain!)
Top
 Profile  
 
 
cjh
Posted: Tue Jan 23, 2007 7:42 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia
The coil does not need to be earthed. If it had a circuit to earth, it wouldn't work. You can get those connectors from Repco or an auto sparky. You'd be lookin at about $7 to $10.

 

_________________

http://youtu.be/jJTh9F3Vgg0
Top
 Profile  
 
 
EBGizmo
Posted: Tue Jan 23, 2007 9:30 pm 
Technical Contributor
Offline
User avatar

Posts: 691

Joined: 1st Jun 2005

Ride: EFII Sedan

Location: Brisbane
QLD, Australia
My mistake - I was thinking of the TFI module. :oops:

 

_________________

EF II Sedan
Ex Chaser, Dual Fuel (Impco LPG)
LSD High, 3.23, Black wheels, other shiny bits.

EB II Sedan <--- R.I.P. (Rest in pieces - gone to the wreckers for $50...... bargain!)
Top
 Profile  
 
 
TURBO_GHIA
Posted: Tue Jan 23, 2007 9:54 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia
you sure about both ends of the connectors

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42
Top
 Profile  
 
 
xpression
Posted: Tue Jan 23, 2007 9:56 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 2516

Joined: 7th Nov 2004

Gallery: 4 images

Ride: LS3 VF

Location: Bunbury
WA, Australia
yeh ive been known to cable tie the coils to heater hoses for short term repairs in my road service days
Top
 Profile  
 
 
EBGizmo
Posted: Tue Jan 23, 2007 9:58 pm 
Technical Contributor
Offline
User avatar

Posts: 691

Joined: 1st Jun 2005

Ride: EFII Sedan

Location: Brisbane
QLD, Australia
MIght just be easier to cut and extend the wires. I know you might want to maintain the original loom, but soldering and extending it would be a much better connection.

PS. Was just looking at some old schematics, and some coils are earthed according to the diagrams. These look like the old can style versions.

 

_________________

EF II Sedan
Ex Chaser, Dual Fuel (Impco LPG)
LSD High, 3.23, Black wheels, other shiny bits.

EB II Sedan <--- R.I.P. (Rest in pieces - gone to the wreckers for $50...... bargain!)
Top
 Profile  
 
 
TURBO_GHIA
Posted: Tue Jan 23, 2007 9:59 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia
to hard to get under car and cut and resolder i want plug and play

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42
Top
 Profile  
 
 
EBGizmo
Posted: Tue Jan 23, 2007 10:01 pm 
Technical Contributor
Offline
User avatar

Posts: 691

Joined: 1st Jun 2005

Ride: EFII Sedan

Location: Brisbane
QLD, Australia
Get an injector plug from the wreckers, and gut an old coil or injector plug for the other end.

 

_________________

EF II Sedan
Ex Chaser, Dual Fuel (Impco LPG)
LSD High, 3.23, Black wheels, other shiny bits.

EB II Sedan <--- R.I.P. (Rest in pieces - gone to the wreckers for $50...... bargain!)
Top
 Profile  
 
 
TURBO_GHIA
Posted: Tue Jan 23, 2007 10:04 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia
cant cut the coil its moulded into it

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42
Top
 Profile  
 
 
EBGizmo
Posted: Tue Jan 23, 2007 10:07 pm 
Technical Contributor
Offline
User avatar

Posts: 691

Joined: 1st Jun 2005

Ride: EFII Sedan

Location: Brisbane
QLD, Australia
If you have a grinder with a 1mm disc, just cut the plug off the old coil, leaving plenty of meat so you can expose the terminals with further cutting.

 

_________________

EF II Sedan
Ex Chaser, Dual Fuel (Impco LPG)
LSD High, 3.23, Black wheels, other shiny bits.

EB II Sedan <--- R.I.P. (Rest in pieces - gone to the wreckers for $50...... bargain!)
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 11 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 49 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 8:28 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names