|
| wome |
|
|||
|
Has anyone sucsessfuly changed the colour filter in Climate control display on E series type. It looks as if you need to de-solder the led display, can anyone advise
_________________ Daily Driver BF XR6 Turbo
|
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
I have put a red filter in mine. Theres a pic of my red dash at night in there
_________________ ^^^ What He Said
|
||
| Top | |
||
| wome |
|
|||
|
do you need to de-solder the display or is there an easy way?
_________________ Daily Driver BF XR6 Turbo
|
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
wome wrote: do you need to de-solder the display or is there an easy way?
hang on, are you talking EA-ED or EF-EL?? both units are very different
_________________ ^^^ What He Said
|
||
| Top | |
||
| wome |
|
|||
|
ef el
_________________ Daily Driver BF XR6 Turbo
|
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
I haven't done an EF EL unit but I have one here that’s pulled apart. If you want to change the filter you need to unsolder one side of the LCD Display.
Alternatively, you can put in a red coloured globe and make you LCD display red like mine.
_________________ ^^^ What He Said
|
||
| Top | |
||
| wome |
|
|||
|
Thanks for that but the rest of the dash is already blue with red instrument faces, so if things work out at night should change to purple. I gues I will have to pull it apart tonight and change the filter.
_________________ Daily Driver BF XR6 Turbo
|
|||
| Top | |
|||
| the_scotsman |
|
|||
|
Yep...you do need to desolder all those damn connections...my dash is all blue too except for this...been meaning to get around to doing it...
|
|||
| Top | |
|||
| wome |
|
|||
|
crap don't try that at home kiddies rum and de-soldering don't mix just cracked the f**ken screen. need to be a bit more gentle, just as well I have a spare.
_________________ Daily Driver BF XR6 Turbo
|
|||
| Top | |
|||
| the_scotsman |
|
|||
|
LMFAO!
|
|||
| Top | |
|||
| andrewts |
|
|||
|
What happened to it mate?
|
|||
| Top | |
|||
| wome |
|
|||
|
Some drunk prised the display to much while tring to de-solder. You need apply even pressure to the display housing while heating each pin in turn very slow process, I had one side almost clear when the screwdriver i was using to prise the display housing slipped and hit the back of the display makinging it bleed. I have a spare but te mod will have to wait as doing full change of wiring harness from fairmont for also fitting elec windows Climate control ABS & cruise, big weekend.
_________________ Daily Driver BF XR6 Turbo
|
|||
| Top | |
|||
| the_scotsman |
|
|||
|
Thats why you need the proper tools to do it....you need a solder sucker....trying to go round them all slowly prising it up is VERY dodgy! At the very least, solder wick should be used...
|
|||
| Top | |
|||
| wome |
|
|||
|
Ta thanks for the advice will hunt one up before next attempt
_________________ Daily Driver BF XR6 Turbo
|
|||
| Top | |
|||
| wicksy |
|
|||
|
i chenged the wedge bulb with a faded one form my parkers on my ed and gez its bright lol
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 101 guests |
