|
twr7cx |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: jump on xr6turbo forums. get a WogCooler through the bloke they call the Wog. They bolt in to the standard pipework and flow heaps better. Good price too. That is the wog cooler, i bought the same cooler off ebay and it arrived with xtc advertising, which is dyno wogs business. As far as bang for you buck they are decent coolers, with just the cooler and generic 10psi tune i got 255.5 rwkw, where as the tune alone normally only gets around 230-240rwkw. Plus they are piss to fit and look good. Wog cooler is the exact smae one as the Monza - They come from the same factory he just bought a few and sold them as "wog" coolers. Use to think the wog was teh ducks nuts but then you hear peoples storys! Get whoever is cheaper - The monza one from autotechnica that Most Autobarns, Repco's, Auto Ones can get in or if the Wog is doing them cheap! Problem with the Monza and Wog coolers are they only replace the cooler. Getting a kit like the Hybrid intercooler kit replaces all the pipe work aswell with larger piping, also shorter overall. |
|||
Top | |
bogan393 |
|
|||
|
Yea chaning the pipe work is deffiantely recomended, i need mine to look as stock as possible though, for warranty and being a p plater with a xr6 turbo, i want to be able to pop the bonnet and say its stock, ifs theres chrome piping eveywhere thats prett hard to do. For how cheap it is, it isnt a bad cooler.
_________________ Rides:
|
|||
Top | |
CHEF |
|
|||
|
||||
Top | |
fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
Did you have to move the air con or anything like that to make such a big cooler fit?
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
Top | |
CHEF |
|
|||
|
Yes, I moved/ pushed the air con line back towards the radiator. And cut some of the bar, about 10mm x 40mm on each end
|
|||
Top | |
fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
Ok then... what's the story with your piping too?
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
Top | |
Mr Man |
|
|||
|
Quote: Wog cooler is the exact smae one as the Monza - They come from the same factory he just bought a few and sold them as "wog" coolers.
Use to think the wog was teh ducks nuts but then you hear peoples storys!! dynowog designed those coolers and monza make them for him, hence them being named a "wogcooler" what stories have u heard neo nick? edit: btw those wog coolers are 300% more efficient than the standard coooler.
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD * Last edited by Mr Man on Mon Jan 08, 2007 4:37 pm, edited 1 time in total. |
|||
Top | |
CHEF |
|
|||||
|
{USERNAME} wrote: Ok then... what's the story with your piping too?
I use the stock rubber hose from Turbo to IC, with a reducer to fit the 3in inlet on the IC... then I made up 2.5in piping to go to the trhrottle body- under the headlight, up and around the manifold into the throttlebody. Doing this you loose the airbox and crossover section, so I mounted a pod filter under the pasanger headlight, and re mounted the bov and plumbed it into the intake. Once it was dynoed it hit 14psi on the 10psi tune, so the tune was redone and it made the same power on 8psi... much better to drive especialy in traffic
|
|||||
Top | |
LOWELGLi |
|
|||
|
APS do a stealth looking one in black
"The APS DR Series intercooler is a High Efficiency bar and plate construction assembly complete with High Flow Air Ducting that is a truly bolt-on replacement unit with no cutting or trimming required." Heres the link http://www.airpowersystems.com.au/falco ... cooler.htm
_________________ I AINT DOIN S**T!!!!!!!
|
|||
Top | |
jaybrumley |
|
|||
|
how did the kangaroo fair?
_________________ Greddy T67, Trust Hi Flow W/gate, HKS Manifold & Extractors, HKS Super Dragger Exhaust, 550cc Blitz injectors, Blitz Pod Filter, GTR Fuel Pump, Blitz Electronic Boost Controller, Apexi Power FC, Greddy BOV, Extreme H/Duty Ceramic Button Clutch.
|
|||
Top | |
wicksy |
|
|||
|
APS intercooler, dearest intercooler on market for xr6t, but damn its a good cooler though
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
Top | |
fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
{USERNAME} wrote: how did the kangaroo fair?
Kangaroo is dead. I have some happy snaps too for those who are interested.
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
Top | |
jaybrumley |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: how did the kangaroo fair? Kangaroo is dead. I have some happy snaps too for those who are interested. Cool send on the pics: jaybrumley@bigpond.com I feel like a sicko now!!!
_________________ Greddy T67, Trust Hi Flow W/gate, HKS Manifold & Extractors, HKS Super Dragger Exhaust, 550cc Blitz injectors, Blitz Pod Filter, GTR Fuel Pump, Blitz Electronic Boost Controller, Apexi Power FC, Greddy BOV, Extreme H/Duty Ceramic Button Clutch.
|
|||
Top | |
fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: how did the kangaroo fair? Kangaroo is dead. I have some happy snaps too for those who are interested. Cool send on the pics: jaybrumley@bigpond.com I feel like a sicko now!!! No shots of the roo you sicko The car afterwards (suprisingly little external damage) Front bar out of whack (thinking of replacing with a BF XR bar..?): Bent numberplate - the roo went bouncing off that Hard to make out in this pic but the intercooler is bent out a bit: Radiator dead: Split in the tank - damn crappy plastic tanks
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 17 guests |