hi guys,
I am in the process of doing a turbo installation aand some advice regarding certain things?
I own a 2001 au falcon with a very healthy dev3HL 4.0ltr motor which is currently putting out 151.4rwkw.
In search of more power i have decided to go the turbo route.
this is what i currently have :
Snort stage 2 logstyle manifold,
KKK racing 600hp turbo - dont know specs ?
External waste gate - dont know specs?
dump pipe,screamer pipe,oil feed and drain lines,
255ltr walbro fuel pump,
42lb hi-flow injectors,
All this was bought as a stage 2 kit and if any body has any information on the specs of kit parts it would be usefull?

Now for questions and sorry guys but i have searched and couldnt find exact information???? thanks in advance

1.My tuner will be adding parts to my current unichip setup to run this setup and was wondering if anybody else has ran a turbo kit with unichip?
2.what rwkw did it perform upto?
3.what fuel reg should i install for this kit?
4.finally what numbers would this setup pull on dyno??

thanks
Futura_011

bump ..... Help please !!!!!!!!
More specs i know is turbo is kkk k27.

help on deciding which injectors and fuel reg for unichip ???

just get a 1:1 fuel reg

and get ford motor sport green tops 42lb

thanks turbo_ghia !!!

then get crescent motorsport to tune it

listen i personally would spend any money modifiing a ford so my best suggestion is get a import

wh yare you on this site then

WTF????

Too small, can't tow boat and take kids to beach at the same time...
Yes I have an import as well! So I know....
The cheaper imports can be alittle sus.Plus the milage on them sus also..They wind there speedo's back....