|
jagga |
|
||
|
hey guys i guess this isnt so much of a problem... just after advice...will i have change over the crank pulley thingi if im putting all the ef xr8 accesories on the au220 motor... for wiring loom purposes...
cheers...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
TerroristGHIA |
|
|||
|
Yes, and if you want i would be willing to swap your pulley, and associated gear for the EDIS system and the dizzy.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
jagga |
|
||
|
ok so what stuff will you need... will u need all of the powersteering and alternator bracketrs etc... or just crank pulley. water pump etc...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
jagga |
|
||
|
what stuff would you be swapping with sry...
i have the ef water pump. crank pulley etc... but i do need to get rid of the au stuff. so i think im open to trades or swappes... dnt know what else i need... hey do u know any 1 that would be interested in a ef engine cover that is painted in kermet the from green... looks tough as.
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
TerroristGHIA |
|
|||
|
Weel, I am after the EDIS, the crank balancer and associated bits for the EDIS, and i would swap a EF balancer and a Distributor. This should be all you need to run the 220 in an EF
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
jagga |
|
||
|
ok sry mind my ignorance... what is edis. is the the coil packs setup. orrr. did u need au3 computer or anythinfg like that... or loom. gots the whole comp loom...
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
jagga |
|
||
|
are the ef balencer and distributor in good nick.. did u run them on the n2o... also. were u still selling ur old nos kit... what would i need to do to get that going on my car... roughly how long does a bottle of nos last... using sparingly... im gonna try run a 9 i think maybe with mods made and i hit of n2o should put me in low 10s... well once i have the 373 diff gears in... what mods have you made to your car.., and what times have you got out of it
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
xr8ute |
|
||
|
EDIS is Electronic Distributorless Ignition System.
So basically the coil packs, crank pickup, and cam position sensor. The EEC is what runs the EDIS in our AU's. However I believe the MegaJolt Jr. (by the Megasquirt guys) can run the EDIS hardware... |
||
Top | |
jagga |
|
||
|
\hey cheers xr8ute... i needed that info sounds good. am i getting a preety even deal here. doesnt bother me any ways tho.... lol altho i could do with nos kit minus bottle... lol
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 38 guests |