|
| kapul |
|
|||
|
Hey guys,
as the name says im thinking about swapping out the old 4.0liter for a 5.0liter. I want an injected v8 and this is the info i have sourced so far... Apparently the easiest v8 to fit in to my ED is the 302Windsor? Just need the v8 mounts. And i can get this motor out of an ef or el because thats the easiest?. Then all i need is the wiring loom and the ecu... Is all that info correct? Any suggestions would be appreciated thanks. Also if there are any other threads on this conversion can you please post up the link as i couldnt realy find anything cheers Jamin
_________________ Fact: Chuck Norris is so fast he can run around the world and hit himself in the back of the head
|
|||
| Top | |
|||
| Rick_Deckard |
|
|||
|
Sounds like a cool mod, good luck with it. Am I right in saying the V8 is more reliable than the I6?
_________________ E39 523i |
|||
| Top | |
|||
| ovo616 |
|
|||
|
not to sure about the ed's but when i did mine (el) i got a complete ef wreck and ended up using almost every thing, you'd be better off getting a ed motor,trans, loom etc so that way you know all the plugs will plug in.
Mre-50L and Waggin have done this in a EB they maybe of some help to you. http://www.fordmods.com/forums/viewtopi ... re&start=0 |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Don't forget the K-member....you need to get a V8 one.
Pete. |
||
| Top | |
||
| ovo616 |
|
|||
|
is that in the eb-ed's XR9??? as we used the same kframe that was in my car to start with.
|
|||
| Top | |
|||
| XR9UTE |
|
||
|
{USERNAME} wrote: is that in the eb-ed's XR9??? as we used the same kframe that was in my car to start with.
Yes EA-D need V8 k-member. |
||
| Top | |
||
| kapul |
|
|||
|
So i can just slot the v8 in with v8 mounts or i need the v8 k-member? can i have a foto if possible?
Cheers Jamin
_________________ Fact: Chuck Norris is so fast he can run around the world and hit himself in the back of the head
|
|||
| Top | |
|||
| Black Betty |
|
||
|
No you need to use the k-frame as well, better off using parts from an ED or EB series 2 because all other 5.0ls have different wiring looms.
|
||
| Top | |
||
| MRE-50L |
|
|||
|
find your self a ritten-off EB-ED 5ltr , transfer everything >
motor box - tailshaft wiring loom ( lefthand side as in the engine ECU harness ) and also the brake booster
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| kapul |
|
|||
|
ok ive found a wrecked ED with a fuel injected 302windsor right... now the wiring harness... wat part of it do i need? can i keep my dash and cluster and everything and just change the part out from between the engine and the ecu or the whole thing?
BTW i got the ed xr8 with sunroof, no mags, lether interior and boot lip spoiler and ECU, wiring harness for 1500 cool price?
_________________ Fact: Chuck Norris is so fast he can run around the world and hit himself in the back of the head
|
|||
| Top | |
|||
| MRE-50L |
|
|||
|
thats a good price
change > motor box , k-frame(also lower control arms and steering rack ) , tailshaft (alloy), Engine ECU harness that goes into the firewall on the LHS , the dash cluster use from the V8 . also is the radiator stuffed from the doner car if it isnt use that aswell
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| kapul |
|
|||
|
yer radiator from donor car is rooted. Can i use my El twin thermos?
_________________ Fact: Chuck Norris is so fast he can run around the world and hit himself in the back of the head
|
|||
| Top | |
|||
| MRE-50L |
|
|||
|
yurp
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| Chich |
|
||
|
Any news on this by any chance. Is this going ahead?
_________________ V8 Windsor here we come..... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
