|
| Tocchi |
|
|||
|
sorry bout the el crappo pic quality
thats the wastegate 'inlet attachment' thingo its for a Tial 44mm wastegate. would i have to change that ring/inlet thingo if i was to downsize my wastegate size to, for example 38mm? |
|||
| Top | |
|||
| ebs_4l |
|
||
|
i rekn the tial gate has an interchangeable v-flange. so i think it would be ok
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| Tocchi |
|
|||
|
awesome. if the worst case happens, ill sell the 38mm (sure ill lose some money, but at least ill have a 44mm gate)
hey ebs, what is the "recommned" mm size governed by? kw? boost? |
|||
| Top | |
|||
| ebs_4l |
|
||
|
the bigger, the better.... nothing like having a wastegate too small.
that said, get a 44mm, you will NEVER find the outer limits of what that can flow, basically, the LOWER the boost level, the MORE wastegate flow you need. although, its not entirely that simple, for the fact that the more boost you run, the more exhaust gas you will make, the more you make, the more you may need to vent... forget the worry and get a decent sized one
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| Tocchi |
|
|||
|
thanks a million for that!
|
|||
| Top | |
|||
| Tocchi |
|
|||
|
i solved the downsizing issue. bought myself a 44m Tial wastegate! haha easy solution
|
|||
| Top | |
|||
| balizticbobo |
|
|||
|
OMG
 A 44 metre wastegate! I gotta get me one of those! J/K! 
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| ebs_4l |
|
||
|
lol
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| Tocchi |
|
|||
|
yeh the 44 metre wastegate is needed because ill be running 9 to 10 Bar
 i hope i dont have a fuel issue with my 52 tonne injectors.
i only need to get a screamer pipe made up now, and get the gaskets and a few various vacuum lines and such. all downhill now 
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
