|
| ben beck |
|
||
|
hey i have a 2V head that i want to put on the 170 pursuit motor i have in my xm. Will it fit on?? any thing i should know about doing it??
Cheers Ben Beck |
||
| Top | |
||
| benno's ed |
|
|||
|
Should go straight on but the exhaust manifold is slightly different.
|
|||
| Top | |
|||
| Walker |
|
|||
|
Wow, never heard of anyone wanting to do that lol.
"IF it does go on", i'd say that the 2V would have a bigger combustion chamber being from a 250, by bolting to a 170 it would end up with low compression... That's for that part, not sure if it's a bolt on item or not. |
|||
| Top | |
|||
| RedRoo |
|
|||
Age: 55 Posts: 1883 Joined: 22nd Apr 2005 Ride: 94 ED Fairmont, MY97 LE WRX Location: Seymour |
The 2V head fits you just to get a good head gasket for it as like Walker said the combustion chamber is bigger and if you use a standard 141 to 171 head gasket it will last 5 minutes and if you use a standard 250 one, the metal ring around the cylinder can burn out.
I did this conversion on my XP Deluxe I had 20yrs ago using a copper head gasket along with a mild cam i also swap the dizzy over to a 250 one 12v compared to 7.8v. You will also have to play around with the radiator hoses. |
|||
| Top | |
|||
| Walker |
|
|||
|
Yeah i remember that rad hose prob, i threw a 221 in my XB years ago after the 250 blew up, from memory the thermostat housing had a diff hose diam the the 250.... Can't remember exactly what i did to fix it though.
|
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
by memery i think the old 170 is shorter them the 200/250 block
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 43 guests |
