|
| tjb45 |
|
|||
|
Where did you get the plugs, and could you get me some?
|
|||
| Top | |
|||
| Krytox |
|
|||
|
Then the safest and easiest way is a mini terminal block.
make sure you fold and solder the ends to get a positive connection.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
nar tjb45 sorry was the only 1 they had had fun trying to chase it up muself after many phone calls.
so krytox it is ok to do what im guna do just cut and re solder to same colourd wires to each other on the new plugs yer ? i got heat shrink and all that im handy with a solder iron if all ok guna go do it all now
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| Krytox |
|
|||
|
Colors will be different in some places.
even if it is EF/NF/DF or EL/NL/DL just copy the wiring diagram from: http://www.fordmods.com/forums/documents.php?doc=14
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
snap the resistor worked but the wire was a white 1 on pin 16 not black/white but anyway its all works now cheers and thanks to all just have to get door sensors now but that can be next week
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| phantom |
|
|||
|
I have access to those types of plugs.I work for a ford wrecker. email me and i will see what i can do for you
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
