|
| MMD |
|
||
|
i have replaced the headgasket, and while it was off i looked at the CAM and noticed that the number markings on it have been changed.
it reads 94DT 62 50 AC 9 the letters in bold are the ones that look as if it the original has been grinded off and they have been stamped using a metal stamp. |
||
| Top | |
||
| arm79 |
|
|||
|
Stock Tickford cam.
Unless its since been reground. |
|||
| Top | |
|||
| stockstandard |
|
|||
|
EF XR6 cam to be precise
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| arm79 |
|
|||
|
Always one in the crowd
It was quite strange of Tickford, but some cams came with the T and C cast into the cam. And some of them came as you have found, with the 2 existing letters grinded off and a T and C engraved on the thing. I've always wondered if there manual and auto EF XR6 tickford cams. |
|||
| Top | |
|||
| MMD |
|
||
|
I was told it was a wade cam,
i thought it was a bit strange that the T was grounds off and then stamped. seems a bit cheap from factory 
do after market cam grinders mark their cams in anyway ? |
||
| Top | |
||
| arm79 |
|
|||
|
Wade will stamp the profile number either on the rear face of the cam, or the face where the cam sprocket slides onto.
Normally its on the rear face. |
|||
| Top | |
|||
| MMD |
|
||
|
1636 on the front face,
3 on the rear Cheers for the info |
||
| Top | |
||
| arm79 |
|
|||
|
Yep, so its a 1636... Have fun!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 70 guests |
