|
| AUMONT5.0 |
|
|||
|
Hi,
Have just purchased series 1 AU Fairmont 5.0. Brakes were inadequate, so I have fitted slotted rotors and Bosch pads. Car stops much better, but still not as well as I would like. Is there an upgrade to improve braking in series 1 AU? Rotors are small, on these cars. Any help appreciated, Regards Simon |
|||
| Top | |
|||
| Krytox |
|
|||
|
You can install AU series 2/3 brakes into and AU series 1.
A few more other things have to be changed also. Do a search, I recall of about 3-4 people doing this as the AU1's have crap brakes.
_________________ Carefree, we may not be number one, but we're up there. Last edited by Krytox on Thu Mar 08, 2007 9:47 pm, edited 1 time in total. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
have u changed the brake fluid as well? that can have a marked improvement on feel as well
next step is braided lines if u still want more u will have to upgrade to Au2 brakes which means au2 calipers,pads, rotors upright and lower control arms and the au2 front anti roll bar
_________________ RIP SCOTT |
|||
| Top | |
|||
| AUMONT5.0 |
|
|||
|
Thanks, I'll do the fluid next, but I think S2 S3 upgrade is on the cards.
I don't drive it that fast, but would like to have some stopping power there if needed, Regards Simon |
|||
| Top | |
|||
| AUMONT5.0 |
|
|||
|
Thanks for the help
Regards Simon |
|||
| Top | |
|||
| au man |
|
|||
|
IF not try to get the S1 T-series Stub axles because then you can put the S2 brakes on your car and they can sit at the back.
|
|||
| Top | |
|||
| bogan393 |
|
|||
|
If your planning to go s2 or 3 then you may aswell go ba brakes, apparently the uprights are exactly the same as au 2 and 3 so im guessing they will fit on the s1. Plus they are cheap as chips.
_________________ Rides:
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
