|
| EBXR8380 |
|
|||
|
Fit good valve sprngs, can be done without taking heads off.. I had Wiend Xcellerator inlet with little 465 cfm Holley four barrel with extractors and it reved well... Mine had a Gt style cam and alittle porting on exhaust ports...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Walker |
|
|||
|
{USERNAME} wrote: Main thing with the old donks is the crappy gearing that comes with them, mate of mine has a 253 worked up sounds wild as but goes like a bag of crap because its got a 3 speed and crap diff behind it.
253 sound good, and they um sound good, they go nowhere.... It's amazing the difference it makes going from a 3.625 inch bore to a 4 inch bore makes (308). You will find that JGSW**** are late model blocks, the old JGNumerical are older blocks. From memory the 302W had the engine number at the back of the block behind the intake, the 289W had them on the front beside the water pump... Or was it the other way around? Please correct me if i'm wrong, it's been a while since i played with an old windsor. |
|||
| Top | |
|||
| BuNtEr |
|
||
|
your right on the location of the number its on the left side rear just below the last spark plug.
So you say the JGSW** are late model motors like what they but in the xr BA'S
_________________ BANNED |
||
| Top | |
||
| Walker |
|
|||
|
My AU starts with JGLW, my EF was SW.
Not sure when they got rid of the numerical after JG, i think it was around EB? |
|||
| Top | |
|||
| lowxr |
|
|||
|
What happened to the za did you get it ???
love the 289 do it to xr gt specs nice and snappy. |
|||
| Top | |
|||
| Jim Beam |
|
|||
Age: 35 Posts: 3505 Joined: 1st May 2005 Ride: EB Fairmont Location: Northern Suburbs, Adelaide |
{USERNAME} wrote: your right on the location of the number its on the left side rear just below the last spark plug.
So you say the JGSW** are late model motors like what they but in the xr BA'S BA's didnt have windsors. They have 5.4 Modular engines.
_________________ Doin it for Scotty. |
|||
| Top | |
|||
| SlickNCGhia |
|
|||
|
im working on it believe me. this guy will crack .... hopefully
_________________ NC Fairlane Ghia. AU engine. Pacemaker 4499. 2.5" Redback Zorst, tints, red dash. 17in ba xr (e-series). Suzuki Across (suzi) Sexy in Black |
|||
| Top | |
|||
| BuNtEr |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: your right on the location of the number its on the left side rear just below the last spark plug. So you say the JGSW** are late model motors like what they but in the xr BA'S BA's didnt have windsors. They have 5.4 Modular engines. OK THanks all good
_________________ BANNED |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 44 guests |
