Alrighty. I've finally finished sanding back the EL XR front and getting rid of the dings and high bits. Its only the top half so i'll half cut my bar and fit it to that.

When i bought the side skirts they were broken to bits. after some fiddly fiberglassing they are back together and aer in the process of been sanded back and high filled. Only thing is i have no idea as to how to fit them. They have two stragne "u" thingies on the bottom of each skirt and have holes all the way at the top of the skirt as well (fiberglassed repair) f

from what i can tell, is that you just "screw" them in? Any ideas would be great. I email ed talon themselves and they were useless.

See pics.

 

 

Attachments:

File comment: Nose cone finally filled and prepped. IMG_2632.jpg [ 301.48 KiB | Viewed 144 times ]

File comment: Weird u shaped thingy. with a stong fibreglass repair because it looks important. IMG_2636.jpg [ 291.81 KiB | Viewed 144 times ]

File comment: Fibreglass repair. IMG_2637.jpg [ 308.5 KiB | Viewed 138 times ]

File comment: Talon side skirt IMG_2638.jpg [ 304.62 KiB | Viewed 129 times ]

File comment: EL xr nose cone. IMG_2639.jpg [ 333.35 KiB | Viewed 148 times ]

where the u shape things are located.

 

 

Attachments:

U shaped things and show off of paint skills.JPG [ 129.52 KiB | Viewed 146 times ]

U shaped thingies would be where you jack car up via the sill seam mate, so if you dont want to wreak your hard work i'd remove the extra fibreglass so you can place jack in the rightful place.
I'm going off the skirts I have for my EB.

I forgot about the jack points. Thanks for that. so are you saying get rid of them altogether so you dont bust the skirt when you jack it up?