Fordmods Logo

Car Lowered today, ABS light now on. 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: Car Lowered today, ABS light now on.
Posted: Tue Mar 13, 2007 4:45 pm 
Technical Contributor
Offline
User avatar

Posts: 69

Joined: 26th Feb 2007

Gallery: 9 images

Ride: BA XR6

Location: Wellington
New Zealand

:(
Picked my car up from suspension shop today, they said when it came off the hoist from being lowered (king spring kit) they said the ABS light was on.
I got into it turned on the ignition and the light came on as normal and went off as normal.
I started the car it came on again and went off again normal.
Roadtested no problems.
Dropped guy back off at shop and drove home, ABS light came on while driving.

Yet to let them know thats its back on, but mag wheel shop, possibly not so clued up on ABS.

Anyone have any ideas as to what it might be?
It didnt even drive off the hoist when the light was on.
They said they checked everything they did and all was ok?

Is there a quick reset proceedure for this, to see if it really comes up as a fault or not?

Thanks in advance....
Matt

 

_________________

Hi-flow airfilter
Hi-flow cold air box
Mesh Grills
Lowered 45mm, Kings Progressive springs
FPV Start Button
Gauge pod with Glowshift Tinted 7 smoke blue backlit gauges
HPC coated Extractors with full 2.5" Rage system no cat.
Flashed ECU
19" 6 Spoke Zoom Hyper black wheels F19x8.5, R19x9.5

Top
 Profile  
 
 
Posted: Tue Mar 13, 2007 5:42 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1953

Joined: 1st Feb 2006

Gallery: 25 images

Ride: BA on gas. EL on gas. XF on gas.

Location: Greenacres/Adelaide
SA, Australia

Sounds like they gave 1 of the front sensor wires a yank. check your front abs sensors.

 

_________________

Member Number 8804
Image

Top
 Profile  
 
 
Posted: Tue Mar 13, 2007 6:04 pm 
Technical Contributor
Offline
User avatar

Posts: 69

Joined: 26th Feb 2007

Gallery: 9 images

Ride: BA XR6

Location: Wellington
New Zealand

thanks, thats sorta what I thought, I have a funny feeling its the RF one.
Ill go to my buddies garage tomorra and put it on the computer checker. Ill post the result

 

_________________

Hi-flow airfilter
Hi-flow cold air box
Mesh Grills
Lowered 45mm, Kings Progressive springs
FPV Start Button
Gauge pod with Glowshift Tinted 7 smoke blue backlit gauges
HPC coated Extractors with full 2.5" Rage system no cat.
Flashed ECU
19" 6 Spoke Zoom Hyper black wheels F19x8.5, R19x9.5

Top
 Profile  
 
 
Posted: Fri Mar 16, 2007 11:50 pm 
Fordmods Newbie
Offline

Age: 40

Posts: 2

Joined: 16th May 2005

Ride: BA XR6T

Location: Toodyay
WA, Australia

Yeah, that happened to my xr6t after i lowered it, my fault.

When putting the struts back in i couldn't be bothered threading the wire underneath the strut, so I left it hanging around the front, i remember checking that it wouldn't tighten when I turned, but it did. I drove without T/C and ABS for a while but just ended up replacing both sensors, a costly lesson


Caspertt
Top
 Profile  
 
 
 Post subject: Problem sloved
Posted: Sat Mar 17, 2007 5:23 am 
Technical Contributor
Offline
User avatar

Posts: 69

Joined: 26th Feb 2007

Gallery: 9 images

Ride: BA XR6

Location: Wellington
New Zealand

exactly that, it still went thru the whishbone part of the shock but they had pulled the cable a bit thru the cable ties and made it slightly longer so when I was on full lock the cable would go around the ball joint thread and pull on the sensor, making the light come on. It was only the right one and you could only check it while the car was on the ground under its own weight.
A trick for young players.

thanks for your help.

 

_________________

Hi-flow airfilter
Hi-flow cold air box
Mesh Grills
Lowered 45mm, Kings Progressive springs
FPV Start Button
Gauge pod with Glowshift Tinted 7 smoke blue backlit gauges
HPC coated Extractors with full 2.5" Rage system no cat.
Flashed ECU
19" 6 Spoke Zoom Hyper black wheels F19x8.5, R19x9.5

Top
 Profile  
 
 
Posted: Wed Mar 21, 2007 12:10 pm 
Stock as a Rock
Offline

Posts: 105

Joined: 24th Jan 2007

Gallery: 2 images

Ride: EL Wagon, Honda CBR600, The Wife

Location: Chelsea
VIC, Australia

Just to add to that, it is a trick for the uninitiated, you should disconnect them from hub by undoing the little bolts on the sensor before dropping the lower shock bolt, common on other vehicles also.

 

_________________

"In my opinion, my opinion is better than yours"

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 25, 2024 6:04 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names