|
| MR_5L |
|
||
|
HI i have a 92 ebs xr8 and wanted to know if i could put an xr8 sprint motor in, car is an automatic.
My current motor is making noises very loudly since i changed my oil last week, i am using 15/40w GTX3. Last but not least would it be cheaper to source the sprint parts instead of fitting the motor. Thanks Brad |
||
| Top | |
||
| Timmeh |
|
||
|
Probably cheaper to get another E series windsor and get some GT40P heads for it and an Explorer manifold. Then you pretty much got a Sprint motor.
Do it up while its not in the car and then engine swap. |
||
| Top | |
||
| xr8ute |
|
||
|
yep, what Timmeh said ^^^
|
||
| Top | |
||
| Steady ED |
|
|||
|
What they said, except exchange "GT40P" with "AFR165" and "Explorer" with "Performer" and chuck "2030" or "TFS1" in there as well.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| XR9UTE |
|
||
|
What steady ED said.
Pete. |
||
| Top | |
||
| bdennis |
|
|||
|
A few issues for ya..
Firstly finding a sprint motor that does not have a car attached to it may be a challenge!. Also the engine management settings (different EEC-IV), injectors, MAF etc are all different to the std XR8. How about just ditch the EB and buy a ED sprint..! I know where there is a nice polly green manual for sale..! 
_________________ '94 ED XR8 Sprint |
|||
| Top | |
|||
| XCMUZ |
|
||
|
What sort of noise is your engine making?
I doubt you will be able to find a sprint motor. I think you would be better off with the AFR's, TFS manifold & 70mm T/B, 75mm MAF and some bigger injectors. |
||
| Top | |
||
| -clampy- |
|
||
|
try putting a thicker oil back in.. also inspect the old oil(from the change u just did aswell as this one) for bits of metal.
if not, au heads and manifold is better than what sprint had, and alot cheaper than afr165s
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| MR_5L |
|
||
|
Hi
Yeh the oil has been changed 3 times and made jack of a difference, when i bought the car (from an idiot member off of here) the oil was as black as crude oil. The sound started appearing about a month ago when i got my licence back and started driving it. The sound is like getting a jar full of coins and rattling it, also i have changed plugs,leads,dizzy cap,rotor button,oil,oil filter,petrol filter(off a bloody holden) and since i changed all of that, car was disconnected for about an hour and a half and it wont idle properly and stalls when first starting the car in the morning. Thanks Brad |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
