|
| Nemesis737 |
|
||
Posts: 42 Joined: 19th Jan 2006 |
G'Day, picked up a crow cam for my ute. Only thing is is that the part number specifies it is a billet cam and not a reground, except when I received it, it had 94DA etc imprinted on the side. Could anyone tell me if thats normal or if it is in fact a regrind and I was ripped off?
|
||
| Top | |
||
| arm79 |
|
|||
|
You could call to ask them about it and confirm.
But I do know Crow purchased a large amount of blank cams from Ford to use for their billet grounds. I'm sure this would just be the case. |
|||
| Top | |
|||
| Slick |
|
|||
|
Nemesis737 wrote: G'Day, picked up a crow cam for my ute. Only thing is is that the part number specifies it is a billet cam and not a reground, except when I received it, it had 94DA etc imprinted on the side. Could anyone tell me if thats normal or if it is in fact a regrind and I was ripped off? Crow only sell billet cams!
I don't quite get you, so the part number 94DA isn't a billet the way they specified it? OR you're not sure if the part number 94DA is a billet?
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| cjh |
|
|||
|
Crow also have a Ford design number on their cams for the Xflow too, and they are billet cams too.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 50 guests |
