|
Sik_Cordz |
|
||
|
hey guys just a quick question i want a very basic turbo setup and im not chasing big power,. how would a t3/t4 go on my engine. i know it would hit boost in the low revs but im not really looking for big power or looking at thrasing the car,
cheers allan |
||
Top | |
Dansedgli |
|
||
|
Depends on the exacts specs of the turbo but I had a T3/T4 hybrid on my EA. It boosted before 2000rpm and made 205rwkw on 14psi.
It was very responsive and was always spooling up. The spooling sound drove me nuts when I was trying to drive quietly, it was impossible to drive quiet until I fitted a good restrictive airbox. |
||
Top | |
Sik_Cordz |
|
||
|
was it ext gate or inter. im looking at int gate
|
||
Top | |
Dansedgli |
|
||
|
A bit of both. It wasnt internal like a normal internally gated turbo ala XR6T but the wastegate still ran off the exhaust housing. It was on the base of the rear housing near the inlet flange and had a seperate pipe for the wastegate gasses and turbine gasses.
|
||
Top | |
HiBoost |
|
||
|
i have same turbo(T3/4) in my car at moment im selling the setup soon, its ok for a cheep steup turbo, the internal wastegate on thses are very small meaning it would boost to a certain amount of Psi before it stays stable, i have problems like trying to keep boost down, my one hits no less than 10-11 psi with out a boost tap, so my low boost is 10-11 psi, with 3" cooler piping and 450/300/75 size cooler. go for something like a external wastegate so you can get boost down lower than 10psi, or go and get a T4.....and get more top end than the t3/4 turbo
_________________ 4LTR-JET: 9.1 @150mph!! |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 41 guests |