|
BlkEB2 |
|
||
|
I just bought an EF Monty that is all apart from the 'standard' diff being very worn......I'm hoping i can put my EB LSD init as i be wrecking that car now.....Can it be done??? Surely the housing and mounts would be the same but just the discs and calipers will be different......Will save me buying another diff!
|
||
Top | |
sexyr6 |
|
|||
|
you will need to change the brake calipers, rotors, and lines and most likely the axels, you will also need to cut the hand brake cable mounts off the EF diff and weld them onto the EB diff...
_________________
|
|||
Top | |
BlkEB2 |
|
||
|
Yeah i realise the calipers and discs and prob the axles to as they have the EF disc flanges on them......But will th EF axles slot into the actual LSD diff drives??? Don't want to change it all and find out they won't fit??? Might be better selling mine and buying a proper EF LSD???
|
||
Top | |
sexyr6 |
|
|||
|
yeah good point not sure there...
_________________
|
|||
Top | |
Krytox |
|
|||
|
Just slap in a centre, use your shims and gears. I could sell you one for $150
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
BlkEB2 |
|
||
|
O.k so the LSD centre will fit into the housing.....then the EF axles will fit back into it......Would change axle bearings while at it too???
|
||
Top | |
BlkEB2 |
|
||
|
Oh and how the bloody hell do i adjust the handbrake cable on this EF......Thers nothing under the car and the lever is covered very well ....Is it under the cover next to the seat inside ???
|
||
Top | |
gogetta |
|
|||
|
nope its in the hub and its a b**ch
_________________ |
|||
Top | |
BlkEB2 |
|
||
|
You mean in the calipers....where the cable attach actuaters? The pads are low so i'll be changing them also.....Have to bloody wait until Repco opens on tuesday too Aarrrgh!
|
||
Top | |
gogetta |
|
|||
|
no its behind the disc, you have to get at from a small slot in the back or take the disc off, adjust, put on etc
_________________ |
|||
Top | |
BlkEB2 |
|
||
|
Ah o.k....will wait til i get new pads......cheers!
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 82 guests |