Where do i run the red power wire from the battery, do i drill through the fire wall and run it under the carpet or is there an easier way to do it?

Should be a spare Grommet plug going through to the Engine Bay just near the Accelerator Pedal, Run it through that and then behind the Cover (the cover that is the same as the one on the passanger side that Covers the ECU), then take off the door step plastic cover things, run it along under that, then under the seatbelt bottom cover, then under the rear door foot cover, then up behind that plastic cover near the back seats and into the boot, Easy, Just have to take the back seat out (piece of piss)

I ran mine firstly through the clutch cable hole. Once I converted to manual I had to run it through the hole just up near the brake booster on the firewall. I needed to removed my cruise control module and brake booster to get at it but I could fit 0ga through there.

sounds to easy, thanks guys.

if u want, use the hole that ur bonnet release goes thru, i have a length of 0g running through that