|
| revcore |
|
|||
|
Anyone know if the AU rocker cover will fit straight onto the EB-ED 4.0? Or even if the EF-EL rocker cover will fit straight onto the EB-ED 4.0?
Thanks.
_________________
|
|||
| Top | |
|||
| dsnow_01 |
|
|||
|
also will a eb rocker cover fit an ef?
sorry to hijack..beter than starting new thread |
|||
| Top | |
|||
| rushed |
|
|||
|
yup just use bolts instead of the boxcar nuts.
ex: if using ef cover use ef bolts, vice versa, from mem the rocker gear doesnt need changing. |
|||
| Top | |
|||
| horis |
|
|||
|
whats neede to do this is the gasket for that series cover and the mounting hard ware on ea-ed the had nuts holding them down remove these nuts then the cover and using a pair of vice grips unscrew the stud and use the bolts that ef-au came out with viceversa for going from ef-au to ea-ed covers
_________________ 95 ef montfor sale pm for info, 88 hilux mud truck |
|||
| Top | |
|||
| ebs_4l |
|
||
|
dont forget, with ef> r/covers, they had a rounded edge on the part that goes where the cam plugs used to, you need to get a file and make that edge square if fitting the later cover to the ea-ed head
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| horis |
|
|||
|
thats y you use the ef-au r/cover gasket they have the cam seals on the cover
_________________ 95 ef montfor sale pm for info, 88 hilux mud truck |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 44 guests |
