|
| Yassi |
|
||
|
Hi all, wanting to fit a rear spoiler and boot garnish to my futura. Is there any tricks to install and or line up that I need to know? Thanks in advance for any help.
_________________ Kezza |
||
| Top | |
||
| Krytox |
|
|||
|
use the rubber seal/strip as a guide. then mark and drill
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| eagle performance |
|
||
|
yeah thats the way that i would do it
just make s hour you use some masking tape before you drill so as the drill dose not rec your boot |
||
| Top | |
||
| the_scotsman |
|
|||
|
I made a cardboard cutout of the garnish with holes where the bolts are. Then used it to mark where to drill...was quite simple in the end...
|
|||
| Top | |
|||
| ozmale42 |
|
||
|
Yassi wrote: Hi all, wanting to fit a rear spoiler and boot garnish to my futura. Is there any tricks to install and or line up that I need to know? Thanks in advance for any help.
How much are they as I was thinking about this too...Is that the piece of chrome above the rego plate as on the Fairmont? I was also wanting the Ghia rear rego plate surrounds too Although don't look good on Fairmonts/ghias in painted in shockwave IMO Where are these available from?
_________________ BA Mk2 GT 6 Speed Manual - Silhouette |
||
| Top | |
||
| the_scotsman |
|
|||
|
usually on eBay, but I just did a search and there's none on the atm...
|
|||
| Top | |
|||
| robsea80 |
|
||
|
i got mine of ebay for $55 withe the chrome number plate suround too looks good too.
if you waan see what it looks like on a futura look at the link in my sig |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
robsea80 wrote: i got mine of ebay for $55 withe the chrome number plate suround too looks good too.
if you waan see what it looks like on a futura look at the link in my sig Man you actually made a EL gli front look good, it's amazing, that EF lower section improves the looks 10 fold.
_________________ E39 523i |
|||
| Top | |
|||
| robsea80 |
|
||
|
yep true and i got the frount bar for $30 complete with reo at the wreckers and then cut and fiberglassed the el top to it all up cost me under $50
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 62 guests |
