|
| Bug |
|
|||
|
Hey all
I have a BRC converter and its too close to my headers and has caused some damage, so I have a heat sheild going in but i'll need to move the converter a bit (again) Just wondering if putting the thing horizontal is an option, I cant see why it wouldnt function the same, but I dont know if converters are designed for a particular orientation.
_________________ EL XR6 5spd |
|||
| Top | |
|||
| gogetta |
|
|||
|
try it whats the worst that could happen
_________________ |
|||
| Top | |
|||
| Bug |
|
|||
|
me wasting a lot of time making up brackets and mountings.
_________________ EL XR6 5spd |
|||
| Top | |
|||
| gogetta |
|
|||
|
people will say its critical the orientation, but ive seen numerous examples of it the other way
_________________ |
|||
| Top | |
|||
| snap0964 |
|
|||
|
So I take it the converter is too big to move upwards and closer to the strut tower ???
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Bug |
|
|||
|
I moved it higher and close to the strut tower as possible for the orig header install, but the need for a heat sheild and a bit of clearance on either side of the sheild has me unsure if I can get enough clearence.. I could perhaps get another cm without rotating it.
Will guess i'll wait and see when it arrives.
_________________ EL XR6 5spd |
|||
| Top | |
|||
| Krytox |
|
|||
|
GRA mount all their converters horizontal.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| EBGizmo |
|
|||
|
I remember hearing that they can be mounted any way whatsoever and will function fine, but vertical mounting with the vapor line at the lowest point prevents all the crap in your LPG from accumulating in the converter too much.
My EB had a horizontal mount above the fuel rail, it ran fine.
_________________ EF II Sedan
|
|||
| Top | |
|||
| EBGizmo |
|
|||
|
I also heard that if the converter is mounted so that the primer button is facing forwards/backwards, this can cause mixture change under heavy braking due to the inertia of the button itself. I wouldn't have thought it had enough weight myself, but the theory is true if it does.
_________________ EF II Sedan
|
|||
| Top | |
|||
| Bug |
|
|||
|
I dont even think my converter has a primer button
_________________ EL XR6 5spd |
|||
| Top | |
|||
| richard williams |
|
||
Age: 55 Posts: 535 Joined: 22nd Sep 2005 Ride: EF wagon & EF fairmont wagon & M Location: melbourne |
I mounted my BRC converter horizontally after being told that GRA recommend it. I had to move it to clear the AU surge tank that I fitted to replace the EF split one. I also had to replace the hose from the radiator as the Ef one was too short. I went for the AU surge tank after looking under lots of bonnets at the car dealers to see what improvements were made by FORD to try and stop head gaskets blowing..... Head with coolant air bubbles/ air lock. The AU tank mounts on top of the strut tower about 2 inches higher than the ED/EF/EL so I figured it couldnt hurt and may help.
|
||
| Top | |
||
| richard williams |
|
||
Age: 55 Posts: 535 Joined: 22nd Sep 2005 Ride: EF wagon & EF fairmont wagon & M Location: melbourne |
Sorry the kids were harrassing me....
What I forgot to say was mine does seem to be working better since I moved it and adjusted it.!!!!!!! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
