|
| Jasxr6 |
|
||
|
Is there an easy way to remove the crankshaft pulley.Have been told to wedge screwdriver through pulley. Also is it simple to replace oil seal behind it. Do i need to remove any other parts.
_________________ EL Futura. XR front end, 5 speed manual, AJR 17's,oxford green, lowered, extractors, exhaust, air filter, oil leaks, sqeeks, always dirty( damm watrer restrictions),dents (d***head at shoping centre's), love her to death!!!! and she died. |
||
| Top | |
||
| Krytox |
|
|||
|
you'll break the timing cover and still won't budge the pulley.
you need a puller spend the $20 and buy one! once removed you'll need this newly bent screwdriver to remove the old seal. press in, refit harmonic balancer and tighten
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Krytox |
|
|||
|
it'll be easier to remove the radiator/fans and tensioner.
obviously the belt has to come off.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Jasxr6 |
|
||
|
I have all the tools to do the job, my only concern is loosing the bolt. i have been told its the hardest part to do in the whole job.
_________________ EL Futura. XR front end, 5 speed manual, AJR 17's,oxford green, lowered, extractors, exhaust, air filter, oil leaks, sqeeks, always dirty( damm watrer restrictions),dents (d***head at shoping centre's), love her to death!!!! and she died. |
||
| Top | |
||
| Krytox |
|
|||
|
Breaker bar and a mallet.
or Breaker bar against floor or K-Frame and hit the key (with no plugs connected)
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| falcon hell |
|
||
|
put a socket and a big bar long enough to wedge in the sub frame and give the motor a quick crank with the key otherwise a rattle gun will do the trick
_________________ and on the eighth day God created the Falcon |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 108 guests |
