Fordmods Logo

How much power??? 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: How much power???
Posted: Wed May 09, 2007 5:29 pm 
Tyre Shredder
Offline

Posts: 398

Joined: 9th Mar 2006

Ride: Falcon

Location: Sydney
NSW, Australia

I have an EL tickford motor I6 ghia with the tickford 3.45gears

I have added Extractors and 2.5inch exhaust system, K&N Panel filter and AU intake snorkel.

How much extra power can I bank on?? How much power are they standard?

Will this flog the 302 injected V8 in standard form down the quarter?

By the way EBV8 is back in the house, loaded guns ready to retort you all

 

_________________

EL Fairmont Ghia, extractors, 2.5 inch system, high flow cat, K&N panel filter, AUXR Snorkel, 3.45diff 0-100km/h 6.9secs

SS COMMODORE LS1 282rwkw, awesome power

Top
 Profile  
 
 
Posted: Wed May 09, 2007 5:48 pm 
Getting Side Ways
Offline
User avatar

Posts: 887

Joined: 8th Aug 2006

Ride: Falcon

Location: Central Highlands
QLD, Australia

1st Answer;

Depending on what dyno you test your car on. With the mods you have mentioned on the car i would say on the Jim Mock Dyno you will probably get 140mockawatts and on the Chiptorque dyno on the Gold Coast i would say between 117-120RWKW. Very accurate dyno!!!!!!!!!!!!!!!!!!

Stock EL Ghia would be about 103RWKW AUTO and 108RWKW Manual.

Stock EF/EL 4.0lFalcon about 97-100RWKW.


2nd Answer;

Depending on the condition of the V8 ford, if it's an auto your will probably beat it but if it's a manual and in tip top condition, it would be very close.

I am guessing your El ghia has an auto
so I would be looking at a low 15sec pass, you really need to get an aftermarket cam fitted and a manual gearbox to get into the high 14's.

Cheers....

 

_________________

97 EL Fairmont 4l OHC .Silver.
Exhaust: Pacemaker's, 2.5" exhaust and Hiflow cat
Intake: FRAM AIRHOG , EL GT snorkel
XR6 300kpa fuel reg Stg 2 Auto Shift Kit.6DJA ECU
PM in Qld looking too buy Toyota 4*4 SR5 Dualcab Hilux 91-97 with 2.8l diesel engine/5spd manual

Top
 Profile  
 
 
 Post subject: Re: How much power???
Posted: Wed May 09, 2007 7:13 pm 
Getting Side Ways
Offline

Age: 36

Posts: 1538

Joined: 4th May 2006

Gallery: 4 images

Ride: ef fairmont turbo

Power: 213 rwkw

Location: melbourne
VIC, Australia

EB V8 wrote:
I have an EL tickford motor I6 ghia with the tickford 3.45gears

I have added Extractors and 2.5inch exhaust system, K&N Panel filter and AU intake snorkel.

How much extra power can I bank on?? How much power are they standard?

Will this flog the 302 injected V8 in standard form down the quarter?

By the way EBV8 is back in the house, loaded guns ready to retort you all


about 105-110kw standard with the mods you will prob get between 115-130rwkw. ALL dynos are diffrent


will it flog a 302??? simply too many factors to consider. that is the one and only answer unless you can specify if THEIR auto/manual, lsd?, amount of kms, condition of motor gearbox diff tires, all these things matter heaps AND MORE IMPORTENTLY WAT CAR ITS OFF.

 

_________________

96 EF FAIRMONT
Garrett gt40turbo, iceman plenum, ported head, turbo cam, double valvesprings, 023 fuel pump, 36lb injectors 4' cat, 4' dump, 2.5 exhaust, build bottom end, hypertonic pistons rods & rods, king bearings, j3. c10 3500 stall
232rwkw@4psi

Top
 Profile  
 
 
Posted: Wed May 09, 2007 7:33 pm 
Getting Side Ways
Offline

Posts: 3025

Joined: 28th Oct 2005

Gallery: 13 images

Ride: BA MKII XR8

Location: Caroline Springs
VIC, Australia

Wicked!

I love you EB V8.

Looking forward to the enevitable stoushes.

Welcome back! :lol:
Top
 Profile  
 
 
Posted: Wed May 09, 2007 9:05 pm 
Oompa Loompa
Offline

Age: 36

Posts: 24

Joined: 31st Dec 2005

Ride: ef boosted fairmont/ba xr6t

Location: perth
WA, Australia

how many extra rwkw would i get from a full rebuild with extractors 2.5" zorst highflow cat, port and poliched, crow cam and heavy duty springs

 

_________________

my 95 ef fairmont 5 speed
ImageImageImage

Top
 Profile  
 
 
Posted: Wed May 09, 2007 9:47 pm 
Stock as a Rock
Offline
User avatar

Age: 44

Posts: 109

Joined: 6th Nov 2004

Gallery: 15 images

Ride: Manual EL XR6

your mods sound very similar to mine, and last dyno check i had 119rwkw. However I've got a manual, and I'm guessing that you've got an auto since it's a fairmont. I haven't got the au snorkel. still got the el one.

will a i6 beat the v8?, well mine did, el xr8 on the forums here couldn't beat me down the quarter mile at heathcote all day. i was posting about 15.2

I think the diff ratio played a huge part. his diff had 3.08 where as i have 3.45

I wouldn't try to run against Dave now, not since he got the supercharger working properly and the 4.11's in the rear end.

cheers,
Jason.
Top
 Profile  
 
 
Posted: Wed May 09, 2007 9:52 pm 
Getting Side Ways
Offline

Posts: 6113

Joined: 8th May 2007

EL__Fairmont wrote:

i would say on the Jim Mock Dyno you will probably get 140mockawatts



hehehe funniest thing ive heard all day.

Everyone who seems to get a set of extractors fitted by them come back with 200kw lol
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 7:46 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names