|
| xr8 dismantler |
|
|||
|
{USERNAME} wrote: hrmm.. interesting... shipping would probably kill me.. will you ship to Brisbane? and a rough idea on cost?
$150 to get it to brisbane |
|||
| Top | |
|||
| fordman351 |
|
|||
|
{USERNAME} wrote: If you actually read the article in PerFord magazine, JETXR not only had to cut a hole in his bonnet, apparently he needed to lower his engine mounts and modify his cross member as well to get it to sit as low as it did. And even with all that work he still had to cut a hole in the bonnet
Kyron: The 'K' frame would need to be modified indefinetly, but do you know for sure if the engine mounts were modifed at all? How could we find out? By the way, are there any any of these BA long motors left for a $1000? I need the power steering pump, alternator, tensioner and air conditioning compressor too. |
|||
| Top | |
|||
| xr8 dismantler |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: If you actually read the article in PerFord magazine, JETXR not only had to cut a hole in his bonnet, apparently he needed to lower his engine mounts and modify his cross member as well to get it to sit as low as it did. And even with all that work he still had to cut a hole in the bonnet Kyron: The 'K' frame would need to be modified indefinetly, but do you know for sure if the engine mounts were modifed at all? How could we find out? By the way, are there any any of these BA long motors left for a $1000? I need the power steering pump, alternator, tensioner and air conditioning compressor too. yep we still have a few of them |
|||
| Top | |
|||
| xr8 dismantler |
|
|||
|
we have successfully fitted a BA 4ltr into a AU falcon , and got it running using the AU PCM.
it just clears the bonnet (with a slight re-mould of 1 of the bonnet ribs) hooks up using the AU coil pack , and most AU accessories. no cutting of wiring looms it all just plug together , some brakets need to be made for water pipes, accel cable and a/c pump new hose needs to be made for power steering . this is a engine change that could be done in a weekend |
|||
| Top | |
|||
| fordman351 |
|
|||
|
Wow! That's very encouraging news, well done guys!
xr8 dismantler: I'm still waiting to hear from the bank about my loan, i'll let you know if/when i get it, then we can do business. |
|||
| Top | |
|||
| Kingkezza |
|
|||
|
Matty, sorry i'm not totally sure about the engine mounts, they could be ok. But yea does say the K frame like you said
_________________ 5spd Heritage Green EL XR6. Wheels by ROH. Stereo by Clarion. Exhaust by Pacemaker & Lukey. Suspension by Whiteline, Durashock and K-Mac. |
|||
| Top | |
|||
| xpression |
|
|||
|
yeh its not looking hopeful for putting them in an e series car easily... should go in an X series car easily enough as they dont have K frames as such, but yeh, its not legal to modify the k frame
|
|||
| Top | |
|||
| shai12 |
|
|||
|
Got any more, plus also got a 5 speed manual to suit Au?
|
|||
| Top | |
|||
| Nicko |
|
|||
|
Darren is on holidays for a few eeks best off to call Phil @ FTG on 03 9758 6900
_________________ Nicko |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
