Fordmods Logo

Water injection~ 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: Water injection~
Posted: Thu May 31, 2007 2:54 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 900

Joined: 14th Mar 2007

Location: Castlemaine
VIC, Australia

Hey everyone, i have a non turbo 98 falcon, 4litre engine etc.

My grandfather, my dad and his mate all did water injection in their old carby cars back in their day, dad and his mate got one car doubling its economy from installing water injection into the bottle neck part of the carby. - I havent done it but i know exactly what to do on the carby cars, i have spoken to a lot of people. One guy telling me that i can install it into my ecu car using a micro switch on the throttle body, a second windscreen washer bottle and a hose running into (and a valve to regulate the feed to) the throttle body - tuning it to drip in at a certain rpm..

Is this kit installable into a non turbo car? -I know the engine cleanliness benefits, but will their be any performance or economy benefits?

Cheers guys -If this is possible and is beneficial then i will happily write up a comprehensive guide in the forums here :)
Matt

 

_________________

it can be fast and cheap,but it wont be reliable
it can be reliable and cheap,but it wont be fast
or you can be fast and reliable,but it wont be cheap

Top
 Profile  
 
 
Posted: Thu May 31, 2007 3:48 am 
Getting Side Ways
Offline
User avatar

Posts: 704

Joined: 19th May 2006

Gallery: 1 images

Ride: 2003 BA XT

Power: 141 rwkw

Location: Perth
WA, Australia

I just had a google, and apparently the gains on a na car are small.
Top
 Profile  
 
 
Posted: Thu May 31, 2007 11:19 am 
Stock as a Rock
Offline

Age: 70

Posts: 168

Joined: 31st Oct 2006

Ride: 4.0 EL/dads taxi

Location: Kingaroy
QLD, Australia

The gains come from the detonation prevention that water injection provides.

This allows you to increas timing to optimum, raise compression, run lower octane fuel.

Dave (?) Vizard wrote about it in his book "Performance With Economy".

Apparently an average motor only needs high octane fuel during acceleration and when the inlet manifold pressure rises to near atmospheric, wide open throttle.

Dave ran an engine on standard petrol with a 15(?):1 compression and ignition advanced to optimum power. Higher compression equals better efficiency.

To simplify it, high turbo boost- reduce timing or add water injection.
high compression with short overlap cams - reduce timing or add water injection.

There is also some benefits for pollution as the water breaks down in the second phase of combustion and the added oxygen and hydrogen burn in the mix.

Try extra set of injectors triggered off vacuum/revs/wot, maybe a parallel ecu with different program.

Go for it,

Grumbles

 

_________________

The thunder of .05 will echoe around Bathurst for ever.

Top
 Profile  
 
 
Posted: Thu May 31, 2007 11:48 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 900

Joined: 14th Mar 2007

Location: Castlemaine
VIC, Australia

Cheers guys, thats an awesome explanation grumblebum, thats a lot, i will check with my insurance company and if i get the all clear then i will be sticking a water injection kit on my car - i will document it here also :)
Matt

 

_________________

it can be fast and cheap,but it wont be reliable
it can be reliable and cheap,but it wont be fast
or you can be fast and reliable,but it wont be cheap

Top
 Profile  
 
 
Posted: Thu May 31, 2007 1:48 pm 
Stock as a Rock
Offline

Age: 70

Posts: 168

Joined: 31st Oct 2006

Ride: 4.0 EL/dads taxi

Location: Kingaroy
QLD, Australia

Just remember that the benefits are negligable on a standard engine.

Grumbles

 

_________________

The thunder of .05 will echoe around Bathurst for ever.

Top
 Profile  
 
 
Posted: Thu May 31, 2007 7:39 pm 
Smokin em up
Offline
User avatar

Posts: 262

Joined: 5th Nov 2006

Location: wilcannia
NSW, Australia

late sigmas and carby magnas had an adjustable vacuum switch, which could be used to trigger water injection, with low vacuum.

 

_________________

vote for pedro ? f**k pedro, f**k him up his stupid a***hole.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 3:48 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names