|
| efxr6wagon |
|
||||
|
I have an EF1 XR6 wagon with the mid-range factory head unit (with the CD button). I want to put a CD stacker under the passenger seat, and am looking at the factory stacker out of an AU (see image attached). It comes with the AU cable. Will it plug straight in and work? If not, what kind of stacker should I be looking for to work with my stock head unit? Thanks.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||||
| Top | |
||||
| Johnson stroker |
|
|||
|
nope will not work. AU stacker had a different plug to back of H/U compared to EF/L h/u's.
You need to look for a 6 stacker out of an EF or EL only. not the premo 10 stacker, the H/U can't control it. ED has a different stacker again.
_________________
|
|||
| Top | |
|||
| efxr6wagon |
|
||
|
Thanks for the quick and knowledgeble response. Is there an adaptor cable available? Or could I have the AU cable re-plugged at reasonable cost to work with my EF H/U?
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| richard williams |
|
||
Age: 55 Posts: 535 Joined: 22nd Sep 2005 Ride: EF wagon & EF fairmont wagon & M Location: melbourne |
No
why dont you go for an aftermarket unit? |
||
| Top | |
||
| CAMERONCOULSTON |
|
|||
|
yeah, i wanted to do the opposite in my old au, asked so many people and was told no and why, and as previous posts say, its totally different wiring, no adaptors available because of this, best bet is to get an fm modulated stacker like i did, i picked up a nice pioneer 6 stacker for $400 a few yrs ago. did the trick great
_________________ CAM860 - White BA 05 Futura, GT bodykit, Cobra badges, BSA 18" mags, Altezza tail lights, Lower bumper forced pod induction
|
|||
| Top | |
|||
| arm79 |
|
|||
|
That looks to be the same stacker used in the late EL's, which I have in my car.
And this is the stacker you need as any of the previous model stackers are too large to fit under the seat. You can also get a bracket from Ford specially made for these stackers that bolts directly to the seat base. If you want to use that stacker it might be worthwhile seeing the price of a cable from Ford for the late EL stacker and see if its worth it. Unless of course Ford pricks changed the stacker pinouts between EL and AU. |
|||
| Top | |
|||
| MR_XR60 |
|
||
|
yeah should work dont see why not
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
