|
phongus |
|
|||
|
Hey everyone...I may suspect that my steering pump is slowly dying. It is a tad harder to steer sometimes and sometimes its fine. Anyways I got another steering pump from my EA which was replaced in 1999 or something, so is basically newer then my 1996 EL steering pump.
Was just wondering if the steering pumps are the same and interchangeable? cheers phong =P~
_________________ phongus = Post whore 2006 |
|||
Top | |
[SXC3A] |
|
|||
|
Hey phong, they should be interchangable, if they have the same mountings then it should be ok, only way to find out is to goto s***,rip every poor C*** off or ricobarn and grab some fluid and give it a shot.Whilst doing that you may want to check the condition of your hoses whilst the pump is off saves you doing it again.
_________________ • F*** McDonalds... I'll make you go Mmmmmm...
|
|||
Top | |
sexyr6 |
|
|||
|
they are the same pump.. only the pully on the front is defferent and you need the right tool to remove them (its a special puller)...ford tool number 7185 (T69L-10300-B)..
|
|||
Top | |
grumblebum04 |
|
||
|
You might have to swap reservoirs, pressed metal housing, and if you do a new seal wouldn't go astray while youv'e got it off.
Grumbles
_________________ The thunder of .05 will echoe around Bathurst for ever. |
||
Top | |
sexyr6 |
|
|||
|
good point, reco kits are like $14...
|
|||
Top | |
phongus |
|
|||
|
hmmmm i don't have the right tools to remove the pulley thingy...booo...but thanks for the info guys. I will try and work something out =D
phong =P~
_________________ phongus = Post whore 2006 |
|||
Top | |
Froudey |
|
||
|
isn't the pulley an allen key?
_________________ R.I.P Tobias my son. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 36 guests |