|
BlownNc |
|
|||
Age: 41 Posts: 451 Joined: 5th Nov 2004 Ride: 5lt Turbo NC, TE V6 Gemini Location: Castlemaine |
As per post title...what type of fitting should i use? Sump is off engine
|
|||
Top | |
dynowog |
|
||
|
{USERNAME} wrote: As per post title...what type of fitting should i use? Sump is off engine any as long as it has the right size hole to match the drain!
|
||
Top | |
BlownNc |
|
|||
Age: 41 Posts: 451 Joined: 5th Nov 2004 Ride: 5lt Turbo NC, TE V6 Gemini Location: Castlemaine |
so i could just use a barb type fitting, then weld the fitting to the sump, and use a rubber hose with a hose clamp?
|
|||
Top | |
TURBOTAXI |
|
||
|
What engine?
Au has enough meat to cut a thread in the alloy. I used 1/2 inch BSP with barb fitting to suit my braided drain. E - series can be done with a drill, punch and tap, but mos people I speak to reckon you are better off to have the sump off and weld a nut on. either way, you will make it work.
_________________ Turbo AU falcon LPG 222.5 RWKW. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 27 guests |