|
| alfy |
|
|||
|
ive done a search bgut turned up nothing.
what im trying to figure out is, my ED jumps up to 2400 rpm when i give it a bootful off the line, and i was wondering if it has a hi-stall or not. so what is roughly the standard RPM of the ED 4.0 stall convertor? cheers lads
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| FairmontXR6 |
|
|||
|
As far as i know eb/ed 4.0ltrs are set at 1600rpm
were as EF/EL are 2000rpm or 2,200
_________________ 1993 Ford Fairmont EB II 5.0L V8 Wagon |
|||
| Top | |
|||
| alfy |
|
|||
|
hmmm so you reckon the ED has a hi-stall then? it does jump to around the 2300-2400rpm mark. is the stall convertor like a box or something i can look at to find out if it is? lol
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| FairmontXR6 |
|
|||
|
I would say that it has an aftermarket stall. Unfortantly you can't see the stall converter.
The stall is in the front of the gearbox, basically it is about the size of a clutch and flywheel, and sits in about the same place.
_________________ 1993 Ford Fairmont EB II 5.0L V8 Wagon |
|||
| Top | |
|||
| alfy |
|
|||
|
alrighty cheers for that mate.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| gogetta |
|
|||
|
alfy wrote: hmmm so you reckon the ED has a hi-stall then? it does jump to around the 2300-2400rpm mark. is the stall convertor like a box or something i can look at to find out if it is? lol
hold your foot on the brake and floor the throttle the engine will rev up to a certain point and stop, that is the stall speed
_________________ |
|||
| Top | |
|||
| luthor |
|
||
|
The actual specification is 2000 to 2200 rpm.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
