Fordmods Logo

WANTED; Various EF/EL Int/Ext ghia/lane parts for a showcar 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: WANTED; Various EF/EL Int/Ext ghia/lane parts for a showcar
Posted: Tue Jan 18, 2005 9:27 pm 
Oompa Loompa
Offline
User avatar

Age: 43

Posts: 25

Joined: 23rd Dec 2004

Gallery: 12 images

Ride: EF Fairmont Ghia

Location: Adelaide
SA, Australia

Hello all,

I am finally making tracks getting my EF Ghia showcar finished as per my original dream...

To complete the car I am requiring various "un-easy to get" parts and hence turn to all you wonderful ppl for help. (SA is hopeless for parts)

The list ;
INTERIOR
2x EF Ghia front leather seats in grey
4x EB Ghia leather headrests with the hole in the middle
1x EF centre armrest console
1x FBT/LTD/Lane??? woodgrain steering wheel
1x EF/L Manual gear boot
4x NF/L door courtesy lamps
2x AU Overhead reading lamp/sunglass holder consoles in grey

EXTERIOR
1x EL GT Grille in any condition as it will be chrome plated
1x Set of EF XR bonnet vents
1x Set of NF/NL chrome window frames

MECHANICAL
1x set of EF/L XR rear suspension arms +/ linkages (I am led to believe
they are of different lengths and will help cure a vibration i've had
since lowering the car when fully laiden???)
1x EL XR6 Fuel pressure regulator
1x Set of EF/L XR6 Exhaust valves
1x Hydraulic clutch setup for manual gearbox

Its a big list i know, sorry guys.
Any help locating these parts would be muchly appreciated.

Thanks for your time
Atech
(Allan)

 

_________________

EF Ghia

Top
 Profile  
 
 
Posted: Tue Jan 18, 2005 9:34 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2975

Joined: 5th Nov 2004

Ride: BF Typhoon

Location: Melbourne
VIC, Australia

Just so you know the steering wheels you are after that are woodgrain could be:

1.) EL GT - Black leather, woodgrain.
2.) FBT - Cappacino leather, woodgrain (same as EL GT)
3.) AU - Fairmont Ghia Option - Black leather, walnut woodgrain (lighter in colour than ef/el)
4.) AU LTD - Light cream, woodgrain as per EL GT.

Pick of the lot is the 1st one as its most common and can be had brand new from 500ish from some wreckers.
I hear xr8 dismantler in melb from FTG auto salvage will be getting some in possibly.
Will have to get the leather colour dyed if you want it grey, cost about 90-110 dollars.

 

_________________

BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats.

Last edited by Daniel on Tue Jan 18, 2005 9:44 pm, edited 1 time in total.

Top
 Profile  
 
 
Posted: Tue Jan 18, 2005 9:38 pm 
Getting Side Ways
Offline

Age: 43

Posts: 2215

Joined: 5th Nov 2004

Gallery: 17 images

Ride: Oettinger Golf GTI

Location: Sydney
NSW, Australia

theres wanting a few bits and pieces

then theres being plain lazy and not calling around

try macarthur parts plus on (02) 4646-1288, or ferntree gully parts

or www. partsfind.com.au and build the car ...
Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:30 am 
Getting Side Ways
Offline
User avatar

Age: 48

Posts: 3519

Joined: 6th Nov 2004

Gallery: 1 images

Ride: BA XR8, XD Fairmont Ghia

Location: Ferntree Gully
VIC, Australia

we would have 90% of these parts. if you send me a complete list in a email i will get back to you with prices.

Darren
Top
 Profile  
 
 
Posted: Wed Jan 19, 2005 12:33 am 
Smokin em up
Offline
User avatar

Age: 38

Posts: 259

Joined: 5th Nov 2004

Gallery: 6 images

Ride: XRGLi EF

Location: Perth
WA, Australia

rear control arms are the same size on XR as wot they are on GLi/futura/fairmont...... i know this coz i have both

 

_________________

BA XR8 manual ute black

Top
 Profile  
 
 
Posted: Thu Jan 20, 2005 1:15 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 1518

Joined: 6th Nov 2004

Gallery: 14 images

Ride: BA XR6 Turbo

Power: 175 rwkw

Location: The Shire, Sydney
NSW, Australia

Hey Allan what kit is that on your car ??
It looks like a fairmont bar with an add on lower skirt (which I don't recognise)
Any better pics than the one in your av/profile ?

 

_________________

ImageImage

Top
 Profile  
 
 
Posted: Thu Jan 20, 2005 11:29 pm 
Getting Side Ways
Offline
User avatar

Age: 48

Posts: 3519

Joined: 6th Nov 2004

Gallery: 1 images

Ride: BA XR8, XD Fairmont Ghia

Location: Ferntree Gully
VIC, Australia

azza wrote:
rear control arms are the same size on XR as wot they are on GLi/futura/fairmont...... i know this coz i have both


rear UPPER control arms are different on the EL XR's
there are 3 different lenghts in the EF-EL range

lower arms are all the same.
Top
 Profile  
 
 
 Post subject: Re: WANTED; Various EF/EL Int/Ext ghia/lane parts for a show
Posted: Wed Feb 09, 2005 8:59 pm 
Parts Gopher
Offline

Posts: 55

Joined: 14th Dec 2004

Location: Brisbane
QLD, Australia

atechnica81 wrote:
Hello all,

I am finally making tracks getting my EF Ghia showcar finished as per my original dream...

To complete the car I am requiring various "un-easy to get" parts and hence turn to all you wonderful ppl for help. (SA is hopeless for parts)

The list ;
INTERIOR
2x EF Ghia front leather seats in grey
4x EB Ghia leather headrests with the hole in the middle
1x EF centre armrest console
1x FBT/LTD/Lane??? woodgrain steering wheel
1x EF/L Manual gear boot
4x NF/L door courtesy lamps
2x AU Overhead reading lamp/sunglass holder consoles in grey

EXTERIOR
1x EL GT Grille in any condition as it will be chrome plated
1x Set of EF XR bonnet vents
1x Set of NF/NL chrome window frames

MECHANICAL
1x set of EF/L XR rear suspension arms +/ linkages (I am led to believe
they are of different lengths and will help cure a vibration i've had
since lowering the car when fully laiden???)
1x EL XR6 Fuel pressure regulator
1x Set of EF/L XR6 Exhaust valves
1x Hydraulic clutch setup for manual gearbox

Its a big list i know, sorry guys.
Any help locating these parts would be muchly appreciated.

Thanks for your time
Atech
(Allan)


Allan,
I have a pair of PC EFII XR6 bonnet vents - $60

Peter, Brisbane.
Could post.
Top
 Profile  
 
 
Posted: Wed Feb 09, 2005 9:35 pm 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Hydraulic Clutch Setup?? - Wasnt the XE 5.8 the last to officially have that?

I know that with my XD I used an XC Bellhousing etc with the V8 gear.

Mind you the way fords gone, I guess that part woud still fit... but a Hydraulic Bellhousing??

The Hydraulic Slave/Master Cylinders arent that much new.
Top
 Profile  
 
 
Posted: Thu Feb 10, 2005 6:48 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

you have a pm about exhaust valves
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 6:16 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names