|
| twr7cx |
|
|||
|
All the E-Series vehicles have the same doors and that. So with the SWB all the sideskirts would be interchangable, right? Like could put EF Series II Tickford sideskirts on an EB Fairmont couldn't ya?
What about the LWB wagons, now I relise there longer between the wheels, so the skirt would go all the way (there'd be a gap with no skirt covering near the back wheel), but will the skirts actually attach on fine with no problems (I don't see why not as the doors are the same as the SWB, it's just got the extended bit after the back door)? |
|||
| Top | |
|||
| uglybob |
|
|||
|
aren't wagon rear doors different? i was looking at my old EF wagon yesterday, and pretty sure the back doors aren't the same?
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
yes, u can fit EF XR side skirts to an EB no probs
the side skirts come in at the back & front.. they go into the wheel arch to be screwed in. you would have to cut that out to make it work. i'd buy wagon side skirts 
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| Andrew J |
|
|||
|
One thing you have to be careful with is the shape of the car itself. Youd need a fairly different bodykit to whats available for the EA - ED to get it to match the round door moulds. You might be better off going for something like the venom sideskirts. Also, on a side note, i believe some commodore sideskirts either fit or come close to fitting. I think it might be the ute skirts though. Might be worth a look
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: aren't wagon rear doors different? i was looking at my old EF wagon yesterday, and pretty sure the back doors aren't the same?
The only places that seem to make E-Series wagon side skirts actuially take the sedan ones, cut them and mod them to fit, and then charge 400 per side or something ridiculous! I was wondering if I could maybe do this myself... Or get my mate who works at a body shop to do it? |
|||
| Top | |
|||
| madmax |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: aren't wagon rear doors different? i was looking at my old EF wagon yesterday, and pretty sure the back doors aren't the same? The only places that seem to make E-Series wagon side skirts actuially take the sedan ones, cut them and mod them to fit, and then charge 400 per side or something ridiculous! I was wondering if I could maybe do this myself... Or get my mate who works at a body shop to do it? Yes it would be possible depending on what or how they need to be altered, bit of glass bit of bog, anything is possible. The price from the shop is most likely driven by demand, the'd have moulds for the sedan, and most likely mass produce the sedan ones. with less demand for the wagon they just fudge up some sedan ones to make them work. (more work involved)
_________________
|
|||
| Top | |
|||
| uglybob |
|
|||
|
i got a quote for wagon side skirts of $350 (std skirts) plus $88 to mod them to fit the wagon profile... thats for the XR skirts... pretty good i reckon!
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
get BA Fairlane side skirts and hack em down to fit
thats pretty much what i did!
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: get BA Fairlane side skirts and hack em down to fit
thats pretty much what i did! You did that on your sedan/SWB. The wagons are longer (LWB, like the Fairlane), how much did you have to hack them down by, just wondering if they'll be long enough to go on the wagon like that too. Once you'd changed the size down did they fit fine? Were abouts would I source them from? I'm guessing Genuine Ford would set me back a fortune! |
|||
| Top | |
|||
| GlennBA |
|
|||
|
{USERNAME} wrote: get BA Fairlane side skirts and hack em down to fit
thats pretty much what i did! I thought they were XR ones you got? how did they turn out? |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
Yeah i got BA XR SWB side skirts...
lopped about 30mm off the end and they went straight on (hold themselves on with NO SCREWS!) if a SWB BA is longer then a SWB E-Series. i imagine a LWB BA is longer then a LWB e-series
but SWB BA ones won't fit a LWB eseries (tries that )
i got them from someone who put a C2R kit on their XR6T. FTG autosalvage had some BA XR side skirts a while ago ($250) so u can get them
just gunna be hard to find BA LWB ones
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| twr7cx |
|
|||
|
Maybe I should get some SWB AU or BA ones and extend them. I'll talk to xr8 dismantler and see what they've got...
|
|||
| Top | |
|||
| EFFalcon |
|
|||
|
last time i was there they had BA XR ones and AU SR ones.
was a while ago so they may be gone or new ones may be there
AU ones are way shorter then BA ones btw.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 51 guests |
