|
| Sprjenkins |
|
||
|
Has anyone fitted these gears to a falcon diff? I know it can be done i'm just wondering how it turned out? Did the diff break or is it still good? Is it really noisy etc. Cheers Joel
|
||
| Top | |
||
| falcon_hell |
|
||
|
I've heard the same thing. Apparently the 3.73 diff gears from R31 skylines are interchangable with E-series falcons. Both run the same series Borg-Warner diffs I've been told.
|
||
| Top | |
||
| MooseMan |
|
|||
|
They fit in but alot of people have trouble with them being noisy I believe.
_________________
|
|||
| Top | |
|||
| mitchg911 |
|
|||
|
if you setup the diff correctly (with appropriate backlash etc) they are fine 3.7, 3.9 and 4.11 will all fit assuming they are setup right. jaysen has 3.7's in his and it runs perfect.
-mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
I asked about shorter diff ratios for my EF, and the diff specialist said theres a bit more work involved fitting 3.7, 3.9's etc. than just fitting standard ratio's? Dont know why?
|
||
| Top | |
||
| gogetta |
|
|||
|
complicated topic but it depends on what u start with and what ur putting in...
search for 75 series 0575 and 78 series 0578
_________________ |
|||
| Top | |
|||
| psupernak |
|
||
|
i put 4.11'1 im my eb. i had to use an ea housing cos the pintara uses early type pinion
_________________ aaahh yes! a forums with more freedom than a nerd in an empty library- www.psupernak.com register asap! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 62 guests |
