|
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
Hey guys, had my manual conversion sitting here a while, have been informed i now have access to a pit to do the conversion in which is a bonus. Have just been reading the tech doc by Voxace, and making sure i have everything, and have only just noticed that i am missing the Dust Cover off the bellhousing.
Now what i need to know is where i can get one of these things and how much its gonna set me back? Live in a fairly "remote" area (use that term loosly) so the only place i can even attempt to get one from is Autopro which i will try tomorrow. If all else fails where else can i try? Only need the little cover bit and the hosuing it mounts on. Thanks fella's |
||
| Top | |
||
| voxace |
|
|||
|
Talk to the guys at FTG: http://www.fordmods.com/forums/viewforum.php?f=24
|
|||
| Top | |
|||
| twase |
|
|||
|
Wrecker ones may be hard to find in good condition, Go to Ford they are not expensive.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| rushed |
|
|||
|
sadly for lil things like that fraud is your only real hope.
as "most" wreckers wont sell bits of a conversion as the conversion is worth more to them complete. shouldnt be much from fraud |
|||
| Top | |
|||
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
well got a price, you'll s**t ur pants almost lol $140 and none of them in SA he didnt even know if he could get it ...... Darren has a cracked one at ftg so ill get that and fix it up i hope:P
|
||
| Top | |
||
| Dansedgli |
|
||
|
$140!!!
Dammit! I need one for the BA motor. 
|
||
| Top | |
||
| twase |
|
|||
|
fairmont599 wrote: well got a price, you'll s**t ur pants almost lol $140 and none of them in SA he didnt even know if he could get it ...... Darren has a cracked one at ftg so ill get that and fix it up i hope:P I bought one a few months ago,it was for an AU but it was around $10-$15. AFAIK its the same as E series. - We are talking about the plastic boot for the ctutch fork?
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Nah the dust cover mounts behind the sump on the bellhousing part of the motor.
I think that is what he is on about anyways. Its missing on mine. |
||
| Top | |
||
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
Well i think ur both right.... it covers up the end of the clutch fork where the clutch cable hooks onto, and it is made of plastic.... so i dunno lol. Got a cracked one coming from FTG so ill just patch that up for now. The guy also said that the EF clutch fork is unservicable, as i needed to replace the cable dampner that sits in the clutch fork and connects to the cable, but i managed to get mine out as it was only held in with a few tabs bent down. The new one i got here from Auto pro doesnt have the tabs so i need to find a way to make it sit in there without falling out.
|
||
| Top | |
||
| twase |
|
|||
|
So thats
$140 for the fork , damper and the boot? If so that is reasonable. If it the just the boot then check again that he is pricing the correct part.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
No its $140 just for the boot he said the fork i asked about seperatly. i asked him twice if it was what i asked for and described it to him.
|
||
| Top | |
||
| twase |
|
|||
|
Try getting a price for an AU one then, as I said it should fit.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| arm79 |
|
|||
|
They aren't $140. He's probably looked up the wrong part number.
I have bought a few before at between $12 and $15, so they are not expensive. Although, that doesn't matter as they are now NLA. The only ones left are what a dealer may accidentally have on the shelf. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
