|
| rushed |
|
|||
|
im helping a mate fit a diff on the weekend, he got hold of a el diff with el control arms.
anything else ffrom the EL that we need to do this? im gathering we use the EL arms right? |
|||
| Top | |
|||
| Krytox |
|
|||
|
You also need the EL hand brake diff cable and EL watts link.
Lower arms are identical, Upper arms are either shorter or the Longer (XR) ones. so... you guessed it, use the EL uppers. Alternativley you can change the hat on the diff and retain the EF setup. Reason: the EL had revised suspension and lowered the centre point of the watts link to cure 'some' body roll. The handbrake cable also travels throught the guide on the EL diff and on EF it is enclosed in a casing above the diff.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| MooseMan |
|
|||
|
hey rushed. I have a EF XR diff sitting here that I want to put into my EL, if that diff is a 3.45 EL LSD then Im happy to swap them to save all the hassles! At least thought I would try my luck.
_________________
|
|||
| Top | |
|||
| twase |
|
|||
|
Krytox wrote: You also need the EL hand brake diff cable and EL watts link. Why the watts link? The hat mount point is different are the bar lengths different? I am using an EF one without any apparent issues.
Lower arms are identical, Upper arms are either shorter or the Longer (XR) ones. so... you guessed it, use the EL uppers. Alternativley you can change the hat on the diff and retain the EF setup. Reason: the EL had revised suspension and lowered the centre point of the watts link to cure 'some' body roll. The handbrake cable also travels throught the guide on the EL diff and on EF it is enclosed in a casing above the diff.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Krytox |
|
|||
|
good point, i forgot why i changed mine, either the hinge was longer of the ef, but im sure i needed the el one. I'll check this w/e, they may be identical!
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| rushed |
|
|||
|
mooseman, sorry but this isnt my diff, and its a 3.2lsd anyway...
so the EL upper arms and the ef watts link what im confused about as i hant been able to compare the two diffs is the handbrake cable, whats the go there. as my mate picked up the diff today, and said it only came with the arms, im unsure iff the handbrake cable came with it, but suppose worst case senario what do we do if we only have an ef handbrake setup? cheers guys. p.s. were fitting this tommorow. |
|||
| Top | |
|||
| twase |
|
|||
|
I ran an ef handbrake cable on an EL diff for a while, bit dodgy but it will get you by until you can get the propper one.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| rushed |
|
|||
|
hope this tread helps someone in the future...
as my friend just came over to my house, and he got a bloody EF diff, so theres no drama's thanks for your help guys. hopefully it goes in easy, as ive got to do this one, and then fit my working LSD very soon. |
|||
| Top | |
|||
| gogetta |
|
|||
|
can anyone post up some pics of the EF and EL handbrake setup differences? pls
_________________ |
|||
| Top | |
|||
| rushed |
|
|||
|
ill grab the EF ones tommorow
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 55 guests |
