|
| ea_falcon |
|
||
|
to get the best out of the aluminum that u are polishing make sure u wire brush it or get a drill piece with it i did that and alloy cleaner and it came up real gd then i used the standered bar polish which i used on the buffer came out nearly mirror
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Kenay |
|
|||
|
ok so i put the rocker cover back of the car and now it runs like s**t and there is oil fukin everywhere ive re checked the bolts to make sure they are tight(they are) dunno if the gasket was wrong but it went on fine . for the running like s**t side of things the spark leads are placed correctly everything is the way i found it (except for the shiny rocker cover). when the key is out the battery and another light flash like every ten minutes ... i had to jump start i btw because i listened to the radio so much so could i have f**k the comp (ecu) somehow
cheers kenay |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
Make sure the rubber gasket is sitting in its groove properly.
|
||
| Top | |
||
| Kenay |
|
|||
|
lol yeh it looked good, im taking it to work tomorrow and ill get my boss to look at it , plus im finally getting a shift kit which is awesome... love working for a transmission joint good fun s**t pay but good fun
|
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
ea_falcon wrote: to get the best out of the aluminum that u are polishing make sure u wire brush it or get a drill piece with it i did that and alloy cleaner and it came up real gd then i used the standered bar polish which i used on the buffer came out nearly mirror if only it were that easy! 
|
|||
| Top | |
|||
| ea_falcon |
|
||
|
nahh its not that easy i forgot to add the 8 hrs that went along with that lol
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| FAST-XR |
|
|||
|
i finished my intake manifold the other day, top half only! the worst job to do ever!
and i only polished the bits you can see, so under the throttle body and air intake pipe i left, still shiny but with casting marks in it! i wasnt that keen in the end!
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 52 guests |
