|
| ACIDIC |
|
||
|
As the subject says, can i just put a mild cam in and run it without a chip?
_________________ 96 R33 Skyline |
||
| Top | |
||
| FAST-XR |
|
|||
|
you can run a substantial cam on the standard ecu without too many problems...
im runninng a CMS stage 3 cam in mine, and it runs on the standard ecu, any bigger then you need ecu mods as its right on the limits of what the eec-v can take... and i won the dyno day with it! haha depends what you want out of your car... CMS stage 2 or stage 3 cam, look into them...
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| stomper |
|
|||
|
It all depends on the cam.
All RPD dont require ECU's. I seen a few EB's running Crow Stage 1 and 2 and they didnt have ECU's. I think its when you get some of the big wades like a 1521a you will need a ECU. Stockstandard is an example. He had the 1521a and had to run a piggy back but then went to the MS II. Check out this sticky in the ECU forum.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| AU1 XR6 |
|
||
Age: 37 Posts: 84 Joined: 21st Jan 2007 Ride: BA MK11 XR8 Location: Sunshine Coast, Kawana |
I run a jmm dev 5 cam in mine with standard ecu, idle is a fairly good, bit wobbly on hot days, it would go better with chip/tune but isnt totally necessary...
_________________ BA MK11 XR8.....6 Speed
|
||
| Top | |
||
| EXAR6 |
|
||
|
you can run a cam with out a chip but will go much better with a chip
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 132 guests |
