|
| KEEPUP |
|
||
|
Hi All,
I am new to this forum and was wondering if anyone could help. I have just purchase my xr6t and in 3rd gear it seem so stall at like 4500revs... Any suggestions to this?? Thanks in advance. |
||
| Top | |
||
| The Dog |
|
|||
|
Should make 5900. Sounds like crook plugs.
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| GeZza200 |
|
||
|
thats weird my dads XR6T revs over 6000rpm quite easily
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| xpression |
|
|||
|
could be alot of things.
common things to check 1. Who does the servicing and are they checking inlet and exhaust manifold bolts EVERY SERVICE as specified in the service book? 2. Check the wiring to the exhaust side cam angle sensor (rear end of head). I've seen them melt and cause all sorts of running issues. Also, how fast are you driving to be doing 4500rpm in 3rd gear? 3. Check fuel pressures etc. |
|||
| Top | |
|||
| Darkr |
|
|||
|
{USERNAME} wrote: Also, how fast are you driving to be doing 4500rpm in 3rd gear?
In a 4 Spd auto, it would be about ~170ish, as I have done a couple runs on the dyno and its about that. |
|||
| Top | |
|||
| FairmontXR6 |
|
|||
|
so if its not doin about 170, then maybe a problem in dash???
_________________ 1993 Ford Fairmont EB II 5.0L V8 Wagon |
|||
| Top | |
|||
| bfhoon |
|
|||
|
it could be overboosting in the higher gears.
or possibly torque tags on the computer. isit edited or stock.
_________________ bf xr6turbo siemens injectors, full plazmaman 800 hp intercooler kit, 5 inch cat and custom dual 2.5 inch zorst, billet flywheel with mal wood clutch kit, braided hoses, big brakes, 3.2L surge tank/w twin 044's rebuilt motor with forged and billet everything 420+ rwkw on 98. holden killer. |
|||
| Top | |
|||
| dcstraight |
|
|||
|
Moved to Forced Induction Workshop
Problem sounds like symptoms of a possible generic edit being loaded ? I know another member on here has similar symptoms with his XR6T - seems to blow out spark at 4500 + in the rev range...maybe try closing up plug gaps in the interim ? |
|||
| Top | |
|||
| ef_frmnt |
|
||
|
check the coils they are s**t. and speed cut might also be an issue.
|
||
| Top | |
||
| bfhoon |
|
|||
|
iv been thinking about this for a few hours...
it may be worth checking the boost control solonoid. next to the battery. if u spray wd40 into the solonoid it may fix this, being a mk1 its a few years old they get a bit sticky after a while and if the computer IN STOCK TRIM cant controll the boost properly it will put a stop to all the fun as it thinks u have a bleed valve on it. referencing from the 2 boost sensors. spark plug gap should be .79 or .80 as said before if u have an edit. if u have an edit, as we dont know yet, it may be the case that your torque tags or rpm limit havnt been adjusted properly. will it rev to 6k in first and second if it does it may be a speed limiter edit or a ford reflash will fix this. best thing if its stock is to get ford to have a look and reflash the computer. you may also have an edited computer with the flash tuner onsold to a nother person with the tune left in your car.
_________________ bf xr6turbo siemens injectors, full plazmaman 800 hp intercooler kit, 5 inch cat and custom dual 2.5 inch zorst, billet flywheel with mal wood clutch kit, braided hoses, big brakes, 3.2L surge tank/w twin 044's rebuilt motor with forged and billet everything 420+ rwkw on 98. holden killer. |
|||
| Top | |
|||
| The Dog |
|
|||
|
^^^^There is a very detailed doco on how to do this on the xr6turbo site.
Well worth the time to do this IMO. And try to do it when you service the car from then on.
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| KEEPUP |
|
||
|
Thanks guys, I really appreciate all your help. I really had no idea what could be wrong... was really spinning me out.
As far as I know its got an air filter, exhaust and thats pretty much it. A little background I bought the car from a second hand car yard and I know the person who owned it prior it being traded in. I really don't know if he would have done anything to the computer. The car has a 3month warranty with the car yard but I don't know whether I trust them to check it out. It couldnt possibly be a speed cut because I am only doing about 130ish... I was talking to someone on the XR forums and they mentioned checking out Elite Automotive in Brisbane Southside. So I might take it them and see if they can help as well, they also do flashing. |
||
| Top | |
||
| dcstraight |
|
|||
|
I'd go with your instincts there...second hand car yard warranty = peanuts...they will know next to nothing...I'd personally prefer them to not touch anything (if it were me).
|
|||
| Top | |
|||
| bfhoon |
|
|||
|
there could be a possibility the exhaust is causing over boost in 3rd.
paul at elite will sort you out he is a good bloke....
_________________ bf xr6turbo siemens injectors, full plazmaman 800 hp intercooler kit, 5 inch cat and custom dual 2.5 inch zorst, billet flywheel with mal wood clutch kit, braided hoses, big brakes, 3.2L surge tank/w twin 044's rebuilt motor with forged and billet everything 420+ rwkw on 98. holden killer. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 8 guests |
