|
| davro_xr6 |
|
||
Age: 44 Posts: 184 Joined: 11th Jul 2006 Ride: BA XR8 Sedan or a potato gun Location: Yeppoon/Rockhampton Central QLD |
Found this:
http://cgi.ebay.com.au/504-X-DRILLED-SL ... dZViewItem Any good??? And do I need the backs as well as the fronts??
_________________ Sadly "X-RATED" has been sold to my brother - no longer do I own my XT - but its a brief sadness!! I now have an XR8 and permanent boner - SCHWING!! |
||
| Top | |
||
| kwaussiekid |
|
||
|
I am told that the cross drilled have a tendancy to break.I went with straight slotted and good pads-(check out our sponsor Hightech brakes) and braided lines,and the difference is phenominal.
_________________ The older I get the better I was! |
||
| Top | |
||
| AUXR8 2 |
|
|||
|
thats right, for street use slotted will do the job & depending how hard you drive.... EBC or BENDIX with the braied lines & it will be a different car......But the EBC green stuff aren't disc friendly meaning that they will chew the s**t out of the rotors, but they will work, more for hard street & track days....
there are other brands of brake pads out there, I use mainly these two brands for genreal use & saloon cars....... |
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
{USERNAME} wrote: I am told that the cross drilled have a tendancy to break.I went with straight slotted and good pads-(check out our sponsor Hightech brakes) and braided lines,and the difference is phenominal. perhaps only depending on how you use the car?
*street *track *quayer mile.. ive had my DBA slotted and CROSS DRILLED rotors for nearly a year now with NO probs WHAT-SO-EVER... |
|||
| Top | |
|||
| Macca |
|
|||
|
Didn't DBA release a statement that this problem has been reduced with a new design.
I will have to have a look.
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
{USERNAME} wrote: Didn't DBA release a statement that this problem has been reduced with a new design. perhaps it was just a "bad batch" of cross drilled and slotted rotors' that failed a couple of time giving them a bad name.. "only take a couple of bad stories to drag the disc's down with public being scared to commit to them..
I will have to have a look. |
|||
| Top | |
|||
| richie |
|
||
|
A good option is a relatively new RDA rotor that is slotted & instead of cross drilled they have dimples ( like only the depth of tip of the drill has been used). I forget the part number. They are a gold anodised color.
I am using these with EBC Reds. Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| davro_xr6 |
|
||
Age: 44 Posts: 184 Joined: 11th Jul 2006 Ride: BA XR8 Sedan or a potato gun Location: Yeppoon/Rockhampton Central QLD |
So no go on the ones from e-bay then??
How much for a set of discs?? And would I need to replace both front and back or just the front??
_________________ Sadly "X-RATED" has been sold to my brother - no longer do I own my XT - but its a brief sadness!! I now have an XR8 and permanent boner - SCHWING!! |
||
| Top | |
||
| kwaussiekid |
|
||
|
davro_xr6 If you wish to improve your brakes, then do both ends. Funds allowing, braided lines, and SRT pads from Hightec brakes-one of our sponsors.
_________________ The older I get the better I was! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
)