|
| hans hartman |
|
||
|
hi,wanted ef xr8 heater valve assebly block,located in front of firewall,with the vacuum valve and four hose block. thanks,pm me
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| twase |
|
|||
|
There are new ones on ebay for $35.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| hans hartman |
|
||
|
twason wrote: There are new ones on ebay for $35. thanks,ill take a look
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| snap0964 |
|
|||
|
Autopro and places like that keep 6 cyl ones on the shelf, they may have the V8 ones also - don't know if they'd be as cheap as $35, but wouldn't hurt to check.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| hans hartman |
|
||
|
snap0964 wrote: Autopro and places like that keep 6 cyl ones on the shelf, they may have the V8 ones also - don't know if they'd be as cheap as $35, but wouldn't hurt to check. thanks snap0964,rang around and repco-coventry spares have them,a lot more $$$$.i need it sunday  but my parts boys have a similar one to fit V8 HOLDEN so will have a look to fit it,should be similar.week end repairs and chasing parts.the 6 cyl ones use 2 hoses with the valve,v8s use 4 hoses,but 2 may be a fixed joiner moulded into the fitting,so the single valve may work.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| snap0964 |
|
|||
|
NP. I was thinking the same thing when I posted - I can't see why you couldn't put a 6 cyl one in, and have the other hose a straight through.
Unless there's something there we don't know about . . . 
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Private9 |
|
|||
|
I have an NF Fairlane V8 - so I should have the part you're after. If you wouldn't mind shooting a pic across to me, I can confirm for sure.
Thanks, Justin. |
|||
| Top | |
|||
| hans hartman |
|
||
|
snap0964 wrote: NP. I was thinking the same thing when I posted - I can't see why you couldn't put a 6 cyl one in, and have the other hose a straight through. thanks for replys,i have a MARRIAGE MADE IN HEAVEN Unless there's something there we don't know about . . .  holden v8 heater tap is the same moulding,vacuum motor is opposite to ford,and cheap---winner.its only a diverter flap with vacuum motor.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| hans hartman |
|
||
|
snap0964 wrote: NP. I was thinking the same thing when I posted - I can't see why you couldn't put a 6 cyl one in, and have the other hose a straight through. can be done that way,but use brass-stainless steel hose fittings,not plastic-although the valve is,mine cracked and split on 2 hoses,and fell apart on removal Unless there's something there we don't know about . . .  short life span.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 62 guests |
