Fordmods Logo

Stainless Pipe for Pod Filter to TB 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: Stainless Pipe for Pod Filter to TB
Posted: Fri Feb 11, 2005 2:54 pm 
Fordmods Newbie
Offline

Age: 40

Posts: 5

Joined: 26th Jan 2005

Ride: ED XR6 Falcon

Location: Croydon
VIC, Australia

Hi guys -
This may have been covered already so please don't get cranky if it has =)

Have a mate who moved down from queensland and has an XH XR6 Ute - he has a K&N Pod filter attached, but has a bent stainless pipe connecting it to the throttle body - I have a pod filter on my ED XR6 already, but am just wondering if anyone can help me locate or source a pipe similar somewhere in the melbourne area, and if so, how much would it cost?

Just figure a stainless or equivalent pipe would have to be better than the EA airbox hose i have the pod attached to at the moment.....
Any help or abuse would be greatly appreciated =D

Thanks guys.........

 

_________________

1994 ED XR6 Le Mans Red, 4 Speed Auto, NGK Iridium Plugs, Bosch sports leads, EA Airbox Hose, K&N Pod Filter, Xplod Head Unit, Kenny 12" Sub

Top
 Profile  
 
 
Posted: Fri Feb 11, 2005 2:58 pm 
Technical Contributor
Offline
User avatar

Age: 40

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

mandrel intake - very popular mod - easy to do! any exhaust shop *should* be able to do it! :P should be around $150 or so :wink:

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Fri Feb 11, 2005 5:55 pm 
Parts Gopher
Offline

Age: 42

Posts: 87

Joined: 12th Dec 2004

Ride: '97 EL GLi Falcon

Location: Melbourne
VIC, Australia

Thanks for that too, uglybob, helps me out too, I'd love to get a s/s intake!

Wolfpac

 

_________________

Hot Chilli Red EL, Doof, Vrooom and Sittin' Low, the way it should be!

Top
 Profile  
 
 
Posted: Fri Feb 11, 2005 8:51 pm 
Oompa Loompa
Offline
User avatar

Age: 39

Posts: 45

Joined: 16th Dec 2004

Gallery: 1 images

Location: mekico
WA, Australia

A freind of mine just got a k&N pod for his 4.0l. We Mounted it on that airbox piping as well, but after a play we had a look at it and relised that it would fit straight on the throttlebody. the performance difference was instantly noticable (moreso then going from $20 pod filter to K&N). I think that the clutch fan may have something to do with that as it gets preety windy and cool next to it.

Although if looks are your thing, madrel intakes are awesome

 

_________________

'92 XR6 (Flame Red)
ENGINE - Stock tickford spec
GEARBOX - T5
- 9.5" cluch
DIFF - Stock 3.45:1 LSD
TYRES - TOYO Proxes 225/16 all round (awesome rubber)
MISC - pioneer head, 12-stack and speakers

Top
 Profile  
 
 
Posted: Sat Feb 12, 2005 9:46 am 
Getting Side Ways
Offline
User avatar

Age: 54

Posts: 1826

Joined: 6th Nov 2004

Gallery: 3 images

Ride: 1997 Falcon EL Gli/Sleeper

Location: Bayside, Brisbane
QLD, Australia

As this topic of POD filter has been covered for the 4,025366351226622 time For all you noobs please dont equat noise for extra performance. Because you will find that is all you will get. Also that and hot air will only be sucked in to it from the engine bay. The reason I say is this because I have been their and done all that even custom fit it in to the Air box and all. In the end I went back to the well oiled K&N panel filter and got better overall performance. if you are going Turbo/supercharger set up then go the Pod by all means :!:

 

_________________

" In life their is never an Obligation just an Opportunity to..Own an awesome 1970 Ford Mach 1 Mustang! "

Top
 Profile  
 
 
Posted: Sat Feb 12, 2005 4:02 pm 
Oompa Loompa
Offline
User avatar

Age: 39

Posts: 45

Joined: 16th Dec 2004

Gallery: 1 images

Location: mekico
WA, Australia

Well by a performance difference I mean that his car, base model EB s.II AUTO with only a 21/2 inch catback, and this 'pod filter' suddenly went from been slighly slower than my xr6(admitidly not as good condition, but manual and stock), to now slightly faster than me. the two tests were performed within five minutes so i dont think condition would be a factor. We both have a well a*** and consistent drag start (And for christ sakes this wasnt at a traffic light but on a well known back road which I beleive to be safe. so please dont reply saying something like "you kids are going to get yourself killed doing stupid sh!t like that". I know the risks.

the results speak for themselves. There is no doubt that his car is now faster than mine.

It certenly has at least got the performance mod itch hapening again, but I must be patient, my breaks need attention first and Id like to upgrade suspension at the same time.

 

_________________

'92 XR6 (Flame Red)
ENGINE - Stock tickford spec
GEARBOX - T5
- 9.5" cluch
DIFF - Stock 3.45:1 LSD
TYRES - TOYO Proxes 225/16 all round (awesome rubber)
MISC - pioneer head, 12-stack and speakers

Top
 Profile  
 
 
Posted: Sat Feb 12, 2005 6:00 pm 
Getting Side Ways
Offline
User avatar

Age: 54

Posts: 1826

Joined: 6th Nov 2004

Gallery: 3 images

Ride: 1997 Falcon EL Gli/Sleeper

Location: Bayside, Brisbane
QLD, Australia

I guess if it has made a definate improvement for ya then so be it. But I would wait a while to see if it is an overall performance gain and not just a slight gain at the low end. Might find your mid-range power level might peak off. Ah well :lol:

 

_________________

" In life their is never an Obligation just an Opportunity to..Own an awesome 1970 Ford Mach 1 Mustang! "

Top
 Profile  
 
 
Posted: Sat Feb 12, 2005 6:51 pm 
Oompa Loompa
Offline
User avatar

Age: 39

Posts: 45

Joined: 16th Dec 2004

Gallery: 1 images

Location: mekico
WA, Australia

oh yeah for sure, i beat him of the line, untill i change into second where are cars where dead even, then when i changed into 3rd he started to creep away. Although i beleive i could beat him to 200. my car charges like crazy when changing to fourth at from 4500rpm

 

_________________

'92 XR6 (Flame Red)
ENGINE - Stock tickford spec
GEARBOX - T5
- 9.5" cluch
DIFF - Stock 3.45:1 LSD
TYRES - TOYO Proxes 225/16 all round (awesome rubber)
MISC - pioneer head, 12-stack and speakers

Top
 Profile  
 
 
Posted: Sun Feb 13, 2005 6:43 pm 
Fordmods Newbie
Offline

Age: 40

Posts: 5

Joined: 26th Jan 2005

Ride: ED XR6 Falcon

Location: Croydon
VIC, Australia

Thanks heaps for the help guys -

I will try both ways - mounting it directly onto the throttle body, and i will soon invest in a stainless pipe, i will ring my local exhaust joint and see what they can do - food for thought.....

Thanks Again!

 

_________________

1994 ED XR6 Le Mans Red, 4 Speed Auto, NGK Iridium Plugs, Bosch sports leads, EA Airbox Hose, K&N Pod Filter, Xplod Head Unit, Kenny 12" Sub

Top
 Profile  
 
 
Posted: Mon Feb 14, 2005 11:16 am 
Getting Side Ways
Offline
User avatar

Posts: 474

Joined: 5th Nov 2004

Ride: BA

Location: SYD
NSW, Australia

Hmmm, muffler place. To have your query answered, it is there you must look.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: Majestic-12 [Bot] and 88 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 6:27 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names