Fordmods Logo

re-wiring front speakers on ef 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: re-wiring front speakers on ef
Posted: Wed Nov 10, 2004 6:52 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 114

Joined: 5th Nov 2004

Gallery: 10 images

Ride: BA MkII

Location: perth
WA, Australia

hey fellas

i got myself some 6" kickers to put in the front doors of my ef. the problem is that the old wiring is buggered so i need to re-wire it, is there anyway i can get the wires through that rubber holder thing in the door without having to take the dash out?

cheers guys
kman

 

_________________

mullets are cool.... they promote the quintessential iconic figure of an australian
Fordmods Member #61

1. 95 Ford Falcon EFII
2. 98 Nissan Pathfinder Ti
3. 04 Ford Falcon BA MkII

Top
 Profile  
 
 
Posted: Wed Nov 10, 2004 7:03 pm 
Getting Side Ways
Offline
User avatar

Age: 51

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia

hmm... might be tough, you'll need to remove the kick panels at least but I think from memory the rubber grommets are quite high up and might be a bit tough....

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."

Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 1:22 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 927

Joined: 6th Nov 2004

Ride: BA Falcon EGas

Location: Perth
WA, Australia

Is there any way you can tie the new cables to the old ones and pull them through? or this there that crappy foam s**t that won't let you to that?

Just a quick fix that could work and save some time thats all.

 

_________________

BA Falcon Futura on EGas. Stock as...

EF 5 speed manual; PH 4480 Pacemaker Headers; 2 1/2" Lukey Mandrel Bent System; Hi Flow Walker Cat; Stage 3 Crow Cam; ChipTorque Chip; 3" Mandrel Bent Intake; K&N Pod Filter; Low Pedders Suspension; 17" EL GT Champagne Rims; RPM Series Clutch

Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 2:11 am 
Getting Side Ways
Offline

Age: 42

Posts: 1993

Joined: 5th Nov 2004

Ride: BA2 XR6T

Location: Mount Colah
NSW, Australia

remove the rubber grommit things and change to EA ones
they are twice as thick, and hence easy as pie to run cabling through :)
just take the kick panels off, you dont have to remove the dash at all.

 

_________________

BOOSTED

Top
 Profile  
 
 
 Post subject: Re: re-wiring front speakers on ef
Posted: Thu Nov 11, 2004 10:48 am 
Moderator
Offline
User avatar

Age: 46

Posts: 4654

Joined: 5th Nov 2004

Ride: Drives Like Fun

Power: 318 rwkw

Location: Melbourne Interior: Cappucino Exterior: Sparkling Burgundy
VIC, Australia

{USERNAME} wrote:
hey fellas

i got myself some 6" kickers to put in the front doors of my ef. the problem is that the old wiring is buggered so i need to re-wire it, is there anyway i can get the wires through that rubber holder thing in the door without having to take the dash out?

cheers guys
kman


Use some WD40 to moisten the rubber grommets...I havae had multiple runs of ~10-12 awg run through my EL doors for 3 way component splits (midbass running active too)...so it is possible...I used a BBQ skewer last time...but you just have to make sure you don't pierce the rubber. A bit of elbow grease and WD40 will see you succeed here.

Yep, no need to remove the dash - just remove the kickpanel and you can reach up and pull wires through from the footwells...again not too difficult...but sometimes like a blind man in an orgy...you just need to feel your way around :wink:

Good luck !

Cheers,
Steve

 

_________________

{DESCRIPTION}

Top
 Profile  
 
 
Posted: Thu Nov 11, 2004 4:31 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 114

Joined: 5th Nov 2004

Gallery: 10 images

Ride: BA MkII

Location: perth
WA, Australia

cheers heaps for your help guys greatly appreciated, doesn't sound too hard a job now

cheers again

 

_________________

mullets are cool.... they promote the quintessential iconic figure of an australian
Fordmods Member #61

1. 95 Ford Falcon EFII
2. 98 Nissan Pathfinder Ti
3. 04 Ford Falcon BA MkII

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 22, 2024 6:54 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names