|
| Kenay |
|
|||
|
hey guys how do i remove the door trim on an au series one thx
|
|||
| Top | |
|||
| lil_lincoln |
|
|||
|
edit
_________________ Last edited by lil_lincoln on Mon Jul 23, 2007 10:47 pm, edited 1 time in total. |
|||
| Top | |
|||
| Kenay |
|
|||
|
ok that would be heaps helpful if it were for an au falcon not an ef/el thx any way mate
|
|||
| Top | |
|||
| Kenay |
|
|||
|
ok for ppl that dont know already this is for electic window trims. there is two screws at the bottom of the door under the caps,
then there is one on the side after you have done that you need to take the plastic plate that the window switch is sitting on out so just stick a knife under it and pop it off the disconnect the wiring loom. after that you need to take the door handle cover of it come off but needed a bit of pulling and pushing down on the clips there is a 10 mm bolt behind that , afer that move ur eyes toward the the side of the door that the hinges are on an there will be a round plug pull that out and and there will be another 10mm bolt undo that then just pull from the bottom and the trim will come off |
|||
| Top | |
|||
| Private9 |
|
|||
|
Those 10mm bolts are pesky hidden little things aren't they!
|
|||
| Top | |
|||
| Kenay |
|
|||
|
yer they are i had to lay on the ground to find out why it was staying on lol. but i got there in the end
|
|||
| Top | |
|||
| Private9 |
|
|||
|
Kenay wrote: yer they are i had to lay on the ground to find out why it was staying on lol. but i got there in the end
I did mine when I was already in a bad mood. Started having thoughts of just ripping it off with brute force, so packed up for the night instead! Came back out in the morning, glanced at it, and realised it was those bolts! |
|||
| Top | |
|||
| Kenay |
|
|||
|
yer that was my first intention but it was a mates car so i couldnt do it, so i tryed ford mods search function but that didnt help, so i made a new topic and one person replyed about taking a ef/el door trim off lol
but in the end i got there AU falcons are s**t my el is so much easier to work on i still cant figure out ow to get the stock 2 din cassete player out ive tryed putting thing into the holes bashin the C*** with a hammer no luck |
|||
| Top | |
|||
| lil_lincoln |
|
|||
|
hehe yeh that was me who did that, whoops, but i do no how to get the 2 din thingy out. get a coat hanger and cut it ect. then stick the 4 bits into the holes and push them in, push ll rods into the middle of the 2 din cd player and with your other hand pull on tape hole (worked for us)
_________________ |
|||
| Top | |
|||
| xpression |
|
|||
|
or you could buy the tools from coventries, they arent expensive and make it easy as pie. Or call in at a dealer, most will remove for free if u ask nicely enough
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 53 guests |
