|
| ebfairmont3.9 |
|
|||
|
stockstandard wrote: ebfairmont3.9 wrote: Your going for what im going for  i wanna hit 200rwkw....But i dont think i will be able to. no chance with the stock intake manifold. with the intake being the bottle neck i rekon ill pull 180rwkw.. Gonna need to buy some 24psi injectors and larger pump 2.How do you know the intake is a restriction? Do you really think 24lb injectors are big enough for 200rwkw? How big are the stock injectors??????? i thought they were 19psi....and ive seen 160rwkw on stock injectors... ive heard the stock intake is basically limited at 170 odd rwkw.....
_________________ 1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit |
|||
| Top | |
|||
| elvondel |
|
||
|
bfhoon wrote: im not saying this is how to do it just tossing in some suggestions.
heres my au v8 with multiple tb`s. coolest looking au ive ever seen lol. |
||
| Top | |
||
| stockstandard |
|
|||
|
ebfairmont3.9 wrote: stockstandard wrote: ebfairmont3.9 wrote: Your going for what im going for i wanna hit 200rwkw....But i dont think i will be able to. no chance with the stock intake manifold. with the intake being the bottle neck i rekon ill pull 180rwkw.. Gonna need to buy some 24psi injectors and larger pump 2.How do you know the intake is a restriction? Do you really think 24lb injectors are big enough for 200rwkw? How big are the stock injectors??????? i thought they were 19psi....and ive seen 160rwkw on stock injectors... ive heard the stock intake is basically limited at 170 odd rwkw..... yep, stock injectors are 19lb, 19lb are maxed out by at <150rwkw
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| ea_5_spd |
|
||
|
thats my current problem with this car the stock injectors r maxxed out at 3/4 throttle it made 155rwkws!!!
thanks 4 the pics bfhoon
_________________ mods: pacemaker extractors, 2.5in red back ,lowered with pedders 17" rims, extreme h/d ceramic clutch, 3.45 ef lsd, and rear brakes, clear indicators, ef thermo's, stage 2 crow (daily) |
||
| Top | |
||
| ebfairmont3.9 |
|
|||
|
Seriously what size injector should pull 180rwkw?? i woulda thought 24 odd psi should do that... i dont wanna go overkill.
_________________ 1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit |
|||
| Top | |
|||
| ea_5_spd |
|
||
|
im gunna get either 42lbs ford motor sport injectors or 55lbs seimens
_________________ mods: pacemaker extractors, 2.5in red back ,lowered with pedders 17" rims, extreme h/d ceramic clutch, 3.45 ef lsd, and rear brakes, clear indicators, ef thermo's, stage 2 crow (daily) |
||
| Top | |
||
| t2te50 |
|
||
|
42lb injectors?????? Isn't that what they use on hypo turbo's??????? Tell me its going into a stroker i6 , to obtain that kind of flow out of 4.0l i6 would need to spin to 10,000rpm lol!!!!!! Thats not an injector that is what is better known as a donkeys penis
 .
Ohowww!! I can sense an abusive post coming up |
||
| Top | |
||
| stockstandard |
|
|||
|
my engine (~150rwkw) hit 100% duty cycle with stock injectors at 4000rpm. With '21lb' injectors it was at 96% duty cycle @6000 rpm (was actually 24lb running at lower fuel pressure).
By doing the maths I have figured out that for a I6 engine you get an ideal 6.6rwkw/lb of injector (you can get more but the duty cycle will be above what is normally considered a safe margin for error) so ... 19lb ~125rwkw 24lb ~160rwkw 30lb ~200rwkw 36lb ~240rwkw 42lb ~280rwkw sorry for pushing the thread off track, might try to post a bit about ITB's later.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| cjh |
|
|||
|
So....will this change with the use on a programmable piggyback unit.???
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 114 guests |
