|
| mrfish |
|
||
|
I have just installed a trip meter into my EL wagon. Display illuminates when ignition turned, can set clock etc. When i turn the lights on the display disappears. The illumination for the side writing & the buttons work & they also dim. Can someone advise me on what i have done wrong.
mrfish |
||
| Top | |
||
| mrfish |
|
||
|
 After more reading & searching I found that i need to add a 47ohm resistor to the cluster. Will do this tomorrow.
|
||
| Top | |
||
| shannonwulff |
|
|||
|
or just cut the illumination/dimming wires, dimming is way overrated anyway
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| krawczuk |
|
||
|
mrfish wrote: I have just installed a trip meter into my EL wagon. Display illuminates when ignition turned, can set clock etc. When i turn the lights on the display disappears. The illumination for the side writing & the buttons work & they also dim. Can someone advise me on what i have done wrong.
mrfish hi, one thing i noticed that if the clock in teh ef/el etc dont show a display , more than likely its teh little globe in the back of the clock , i only just found this out , for u to be able to see the display , the globe HAS to be working , looks like its got some weird type of display. mark k |
||
| Top | |
||
| mrfish |
|
||
|
Added the 47ohm resistor all good now. Just have to replace oil pressure sensor & do mod to washer bottle low level.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
