|
EB XR8 |
|
||
|
Just a quick question here:- If i got some headers that fit the stocko ford heads in my EB, will they bolt up to either Trickflow or edelbrock heads?? (Not interested in GT40's anymore). Thanks
_________________ 5L, 5 Speed, 2.5" exhaust, 17" EL GT's, GT body kit. Pearl Black. |
||
Top | |
Waggin |
|
|||
|
Hey Mate,
Apparently the GT40X alloy heads will fit fine into the EB with E7 extractors
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
Top | |
MrLandau |
|
|||
|
The Trickflow "street heat" and "Track heat" heads use the standard exhaust spacing and placement. The "high ports" and "R's" have a raised exhaust port which require custom extractors.
Shane
_________________ Weapons of choice |
|||
Top | |
Trick Flow EL |
|
|||
|
I have Trick Flow twisted wedge heads and standard EL2 XR8 headers bolt straight up.
_________________ EL2 XR8 Auto 13.64 @ 100.76 MPH with a 2.05 60ft. Now sold! |
|||
Top | |
EB XR8 |
|
||
|
HOw much can you get a set of EL2 xr8 headers for???
Do they still even make them or do you have to be lucky enough to find a wreck? What size primaries on the EL headers? Also, i hear a lot about E7 headers. What size and who makes them?? Question for trickflow EL, I see you have two different power outputs in your signiture. were these taken between doing different mods or just differences in dynos?? Cos it seems like a considerable difference if no mods were done between dynos.
_________________ 5L, 5 Speed, 2.5" exhaust, 17" EL GT's, GT body kit. Pearl Black. |
||
Top | |
Waggin |
|
|||
|
The Dyno runs were on 2 different dynos.. done a few weeks apart.
The lower reading was done on an MDX Dyno, using Avg Power figures. I'd guess the one @ Jakes would be a Dyno Dynamics Dyno, in shootout mode, and the figure would be peak power.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
Top | |
Who is online |
---|
Users browsing this forum: xhxr8man and 44 guests |